Minnesota Classic Glastron Forum

General Category => Classified / Wanted to Buy => Topic started by: Hotwired on March 08, 2016, 11:04:57 AM

Title: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
Post by: Hotwired on March 08, 2016, 11:04:57 AM
As a lot of you know I have been making repo bow caps and windshield posts for some time.  I have been asked to make a set of Intimidator stern rub rail caps.  Does anyone else have a immediate need for them?  They will likely cost around $75 each ($150 set) to have made and polished.

I am headed to the foundry in the next day or so to see about starting another batch of parts, mainly the Intimidator stern rub rail caps.
Title: Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
Post by: fireman24mn on March 08, 2016, 12:15:03 PM
I think there would be some interest in the center support for the CV-23 as well there are a couple people up here that would like to change to the forward facing w/s.
 
Title: Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
Post by: Hotwired on March 08, 2016, 12:16:41 PM
If you or anyone else has one I could copy, I can have that made also.
Title: Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
Post by: fireman24mn on March 09, 2016, 11:54:28 AM
I have one I could send down. I don't need one but I know there was a couple people talking about converting to the forward W/S I would find out interest first before reproducing.

Title: Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
Post by: Hotwired on March 09, 2016, 11:57:37 AM
Ya, lets see if anyone else chimes in.  Thanks though!
Title: Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
Post by: racinjason68 on March 09, 2016, 05:23:13 PM
Stern Rub rail caps, I am the guy from Oklahoma that was asking about these to be made. 
Title: Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
Post by: Hotwired on March 09, 2016, 06:07:06 PM
Thanks RacinJason68 ..... I should have more info within a week.
Title: Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
Post by: racinjason68 on June 09, 2016, 03:29:06 PM
Did you end up making any?
Title: Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
Post by: Hotwired on June 09, 2016, 05:17:31 PM
Which parts?  I did have the intimidator stern caps made.  My Polisher has been behind.  I should have these back in a week or so.  I also have bow caps for the CV and GT boats as well as a few CVX windshield posts left.  I am going to be making some GT-160 stern caps in a week or so in that happened to be what you are looking for.  No CV-23 windshield posts.  I have not found a doner for that yet.
Title: Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
Post by: rheine on June 09, 2016, 10:49:05 PM
I have the forward facing center post 2 piece part for an 86-23. I can part with it for a couple weeks if that helps/


R
Title: Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
Post by: Hotwired on August 06, 2016, 11:42:21 PM
finally .... done with the stern rub rail caps for the Timmi ..... my Foundry changed hands and they are just now catching up. 

(http://i461.photobucket.com/albums/qq332/Hotwired-II/IMG_7823_zpst0hgqagi.jpg) (http://s461.photobucket.com/user/Hotwired-II/media/IMG_7823_zpst0hgqagi.jpg.html)
Title: Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
Post by: racinjason68 on August 06, 2016, 11:52:00 PM
Awesome!  I just bought an original set about two weeks ago! 
Title: Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
Post by: menace on September 06, 2017, 06:37:55 AM
any cvx winshield posts available? if so how much plus shipping to ny