Minnesota Classic Glastron Forum
General Category => Vendor and Repair Resources => Topic started by: Hyperacme on January 18, 2013, 07:07:19 PM
-
Should fit most boats ...
If you know of others please post, and I'll add to thread ...
BEST OPTION ...
Eagle Moldings V-744-BK is Perfect snug fit ..Looks great!
https://eagle-aluminum.com/product/vinyl-rub-rail-insert/
You can contact Grace Wuollet @Eagle Moldings to order: (763) 493-2995
*************
Wefco ...
http://www.wefcorubber.com/ (http://www.wefcorubber.com/)
*************
Rub Rails.com ...
http://www.rubrails.com/ (http://www.rubrails.com/)
************
Eagle Mouldings ...
http://eagle-aluminum.com/ (http://eagle-aluminum.com/)
***********
TACO Marine
https://tacomarine.com/rub-rail?gad_source=1&gclid=CjwKCAjww_iwBhApEiwAuG6ccDWEcj1yZhujIhWxMGwCMjwepVFji6uO89bWIMu5YypN8_I_TJvHnRoCuLkQAvD_BwE
**********
Barbour Plastics, Inc.
https://www.barbourmarine.com/rubrails_trim.php
*********
GR?NDL-BOOTSIMPORT ..
https://shop.gruendl.de/Decksausruestung/Scheuerleisten/Aluminium-Profil-38-mm-24-Meter-4-x-6-Meter-24-Meter-Aluminium-Profil-38mm.html?listtype=search&searchparam=Scheuerleiste
-
Pictures & measurements
-
We have a company here in Germany that has the original rubrail. If anyone is interested I could order a few hundred yards and have it shipped ;-)
-
Hello G/C folks!
Shedding some light on a new rub rail vinyl insert for my 1978 Glastron Carlson CV23.
The Taco V12-0303 looked like it would be a close replacement, but proved to be too loose once installed. (See photos-read photo name)
I could not obtain samples from WEFCO. Note: WEFCO is rubber, not vinyl.
The Eagle Moldings V-744-BK is THE TICKET! Perfect snug fit! Looks great! (See photos-read photo name)
What you see in the photos is a 1 foot sample piece to show the cross section and installed fit. I subsequently purchased 57' to go around my boat. (27' each side with 3' as spare)
You can contact Grace Wuollet @Eagle Moldings to order: (763) 493-2995 Grace@Eagle-Aluminum.com
Hope this helps!
Mark Priglmeier
-
Just a note: Eagle Moldings V-744-BK vinyl rub rail insert worked GREAT on my 1976 CV-19ss and my friends CV-16. Remember to heat with a hairdryer or heat gun for easy installation. This IS the stuff. Mark
-
After the first time, doing it cold and getting a blister? I put the whole roll in a bucket of hot water.
Sent from my iPhone using Tapatalk Pro