Thanks again Glenn , the crank pulley and the pump pulley are the originals , the crank pulley has a shim behind it to match the waterpump . I was able to find a new pump at the same height as the original pump that came with it . I'm going to try the distributor with or without the vacuum advance to see which works better , the distributor is a cheap chinese unit, if it doesnt work out i'll go with a brand name marine unit later on . I shot the engine with VHT high temp engine paint and VHT high temp clear after i de-greased the whole thing , its an engine its gonna get greasy and dirty not much i can do to stop that in the environment its gonna live in , it should look pretty good for a few years at least lol . Gil