Author Topic: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.  (Read 1511 times)

0 Members and 1 Guest are viewing this topic.

Offline Hotwired

  • Hero Member
  • *****
  • Posts: 1298
  • The Ship
As a lot of you know I have been making repo bow caps and windshield posts for some time.  I have been asked to make a set of Intimidator stern rub rail caps.  Does anyone else have a immediate need for them?  They will likely cost around $75 each ($150 set) to have made and polished.

I am headed to the foundry in the next day or so to see about starting another batch of parts, mainly the Intimidator stern rub rail caps.
.. it is what it is ... and that is how it should be!
Miss Mayberry - 1964 Saberflite
The Ship - 1979 CV-27
Canon Ball Eyes - 1976 CV-16ssV8
Da ProJect Bote - 1977 CV-23
It Is What It Is...... CVX20

Offline fireman24mn

  • Hero Member
  • *****
  • Posts: 1803
Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
« Reply #1 on: March 08, 2016, 12:15:03 PM »
I think there would be some interest in the center support for the CV-23 as well there are a couple people up here that would like to change to the forward facing w/s.
 
I think this has become an addiction.


1977 CV-23 I/O Being restored
1976 CV-23 Jet
1985 Pearson MotorYacht 43ft

Offline Hotwired

  • Hero Member
  • *****
  • Posts: 1298
  • The Ship
Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
« Reply #2 on: March 08, 2016, 12:16:41 PM »
If you or anyone else has one I could copy, I can have that made also.
.. it is what it is ... and that is how it should be!
Miss Mayberry - 1964 Saberflite
The Ship - 1979 CV-27
Canon Ball Eyes - 1976 CV-16ssV8
Da ProJect Bote - 1977 CV-23
It Is What It Is...... CVX20

Offline fireman24mn

  • Hero Member
  • *****
  • Posts: 1803
Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
« Reply #3 on: March 09, 2016, 11:54:28 AM »
I have one I could send down. I don't need one but I know there was a couple people talking about converting to the forward W/S I would find out interest first before reproducing.

I think this has become an addiction.


1977 CV-23 I/O Being restored
1976 CV-23 Jet
1985 Pearson MotorYacht 43ft

Offline Hotwired

  • Hero Member
  • *****
  • Posts: 1298
  • The Ship
Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
« Reply #4 on: March 09, 2016, 11:57:37 AM »
Ya, lets see if anyone else chimes in.  Thanks though!
.. it is what it is ... and that is how it should be!
Miss Mayberry - 1964 Saberflite
The Ship - 1979 CV-27
Canon Ball Eyes - 1976 CV-16ssV8
Da ProJect Bote - 1977 CV-23
It Is What It Is...... CVX20

Offline racinjason68

  • Newbie
  • *
  • Posts: 5
Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
« Reply #5 on: March 09, 2016, 05:23:13 PM »
Stern Rub rail caps, I am the guy from Oklahoma that was asking about these to be made. 

Offline Hotwired

  • Hero Member
  • *****
  • Posts: 1298
  • The Ship
Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
« Reply #6 on: March 09, 2016, 06:07:06 PM »
Thanks RacinJason68 ..... I should have more info within a week.
.. it is what it is ... and that is how it should be!
Miss Mayberry - 1964 Saberflite
The Ship - 1979 CV-27
Canon Ball Eyes - 1976 CV-16ssV8
Da ProJect Bote - 1977 CV-23
It Is What It Is...... CVX20

Offline racinjason68

  • Newbie
  • *
  • Posts: 5
Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
« Reply #7 on: June 09, 2016, 03:29:06 PM »
Did you end up making any?

Offline Hotwired

  • Hero Member
  • *****
  • Posts: 1298
  • The Ship
Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
« Reply #8 on: June 09, 2016, 05:17:31 PM »
Which parts?  I did have the intimidator stern caps made.  My Polisher has been behind.  I should have these back in a week or so.  I also have bow caps for the CV and GT boats as well as a few CVX windshield posts left.  I am going to be making some GT-160 stern caps in a week or so in that happened to be what you are looking for.  No CV-23 windshield posts.  I have not found a doner for that yet.
.. it is what it is ... and that is how it should be!
Miss Mayberry - 1964 Saberflite
The Ship - 1979 CV-27
Canon Ball Eyes - 1976 CV-16ssV8
Da ProJect Bote - 1977 CV-23
It Is What It Is...... CVX20

Offline rheine

  • Full Member
  • ***
  • Posts: 81
    • A Universe of Equine People and Knowledge
Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
« Reply #9 on: June 09, 2016, 10:49:05 PM »
I have the forward facing center post 2 piece part for an 86-23. I can part with it for a couple weeks if that helps/


R
1986 CV-23

Offline Hotwired

  • Hero Member
  • *****
  • Posts: 1298
  • The Ship
Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
« Reply #10 on: August 06, 2016, 11:42:21 PM »
finally .... done with the stern rub rail caps for the Timmi ..... my Foundry changed hands and they are just now catching up. 

.. it is what it is ... and that is how it should be!
Miss Mayberry - 1964 Saberflite
The Ship - 1979 CV-27
Canon Ball Eyes - 1976 CV-16ssV8
Da ProJect Bote - 1977 CV-23
It Is What It Is...... CVX20

Offline racinjason68

  • Newbie
  • *
  • Posts: 5
Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
« Reply #11 on: August 06, 2016, 11:52:00 PM »
Awesome!  I just bought an original set about two weeks ago! 

Offline menace

  • Newbie
  • *
  • Posts: 1
Re: Alluminum Castings, CVX/CV bow caps, CVX windshield posts, ect.
« Reply #12 on: September 06, 2017, 06:37:55 AM »
any cvx winshield posts available? if so how much plus shipping to ny