What kind of electric fuel pump should I use?

[nes-cv23]

The futura I got is having fuel starvation problems, runs great under 2000 rpm. But any higher and it stumbles and sounds like it's loosing cylinders.  so I think I need to put in a new fuel pump. Any recommendations on what kind to use and do I also need a regulator to adjust pressure, and how much pressure?   89  5.7 350 with q jet.   This pump is what is in it now.  With no regulator. Fresh rebuild on carb. Also. Thought that was the problem. 

[thedeuceman]

i used this fuel pump on both the 1900 and bal harbor
https://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=Airtex+E8337+Universal

and this is the oil pr switch i used so the pump wont run if the motor is not running
​http://www.ebay.com/itm/Standard-SMP-PS132-Oil-Pressure-Light-Switch-Fits-AMC-CHRYSLER-DODGE-VW/152509891258?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

also this is overkill but this is the fuel pr guage i used
https://www.mcmaster.com/#9780t11/=18jfyfn

​Shawn also used the same pump and oil sw on the CV23

[Plugcheck]

       The Facet pumps do come in several models, so it is important to look up the model just to be sure.   You Qjet will be happy from 3-6 psi, a bit higher if new seat and float.   We used Facets exclusively on VW off road vehicles, but bought a model that supplied about 3-4psi to feed Webers or Dells.   They make a Facet that can do over 10psi, I assume if a long run from the tank.

[Rosscoe]

I used a Holley in the jet.

[nes-cv23]

All set..   New fuel pump,plugs,cap,rotor,wires,filters... Hopefully the futura will run good for the gathering.. And yes, old blue is coming also.