Minnesota Classic Glastron Forum
General Category => Classified / Wanted to Buy => Topic started by: demian5 on September 20, 2019, 03:18:30 PM
-
Hi Im looking for a set of teak strips for a 79 CVX-16 SS. The 3 strips on each side for boarding the craft from the stern.
OR maybe someone has dimensions for them so I could make my own?
Thanks in advance for any info or leads.
-
Are your present teak strips removed? If so, is there a difference in the metal flake shading so that you can use the shading as a template.
I have a CVX-16, but do not know if the dimensions are the same.
Let me know if you need measurements.
-
On the Classic Glastron Owners Facebook group one of the guys gave me decent measurements from an outboard model. I went ahead and used those and made a template from the back of the boat using where I could see the outlines of the slats, for a template. Friend of mine has some scandanavian teak and is going to make me a brand new set.
I'm thinking I will rivet them on unless others say different. I've seen screws and rivets. I do have one hole that looks like it was drilled twice thought.
-
Personally, I'd opt for the synthetic mats like Shawn used. No maintenance, and look great for years.
-
I would think there would be less chance of cracking wood if counter sunk and screwed.
-
I would think there would be less chance of cracking wood if counter sunk and screwed.
You got pictures of those??
-
I would think there would be less chance of cracking wood if counter sunk and screwed.
That's good info. Thanks.
-
No .. I do not ..
-
You got pictures of those??
Is this what you’re asking about? These were on my SSV-191 deck boat that I sold.
-
Yeah but on the CVX-16 SS hull a couple things are different it seems. The ends are cut at an angle with the body lines and they are held in with 4 screws each.
Would anyone know what screws I would use and if I would put nuts on the back or just screw into the fiberglass?
This is what the holes in my hull look like now.
-
Ended up making them. I have the templates we used if anyone can use them to make theirs.