Author Topic: 1969 V143 Jet Flight Engine considerations  (Read 2031 times)

0 Members and 1 Guest are viewing this topic.

Offline ars71

  • Newbie
  • *
  • Posts: 6
    • American Runabouts
1969 V143 Jet Flight Engine considerations
« on: February 27, 2021, 05:25:18 AM »
HI,
i just bought a 1969 V143 Jet Flight in great condition without engine.
I have a Mercury Classic 50 here and a 90HP Tower of Power.
my feeling is that the 90 is too heavy for the boat. All pics I found show engines between 50 and 65 HP.
Would be interested to get some first hand recommendations.
Thanks and best
Achim
--
1974 GT160
1971 CV19
1973 CV16
1969 V143

Offline Plugcheck

  • Donate members
  • Hero Member
  • *****
  • Posts: 3267
Re: 1969 V143 Jet Flight Engine considerations
« Reply #1 on: February 27, 2021, 11:07:08 AM »
Not sure what the label plate would indicate for max HP, maybe Gregg has a brochure. I would take a SWAG and say around 60hp is it's labeled max hp.  Difficult question really, if you put the 50 on it, you'll always be wondering how much better it would perform with the 90.  I suppose it comes down to your intended use, and maybe your insurance carrier's stand on exceeding label plate specs?  Since I do my own rigging, I'd give the 50 a try, then maybe the 90. If you're having a company rig it, will they even consider the 90?  Nice looking boat, I always like them with the split windshield.
Michael
1979 CVZ-18 388 CI Vortec Mouse
1980 CVX-16SS 140 Mercruiser
1979 CVX-16 Johnson 175
2002 Bennington 2275CC 90 Mercury
1985 Intimidator project
1989 Lowe 200 Redneck fishin Toon
2001 Godfrey Sweetwater pontoon 115 Rude

Offline ars71

  • Newbie
  • *
  • Posts: 6
    • American Runabouts
Re: 1969 V143 Jet Flight Engine considerations
« Reply #2 on: February 27, 2021, 12:10:02 PM »
The 1971 catalogue says "rated up to 65 hp".. but I run a 150 on my CV 16 and that is perfect.. IN this case the weight difference between the engines might be the issue.
any 143 owners here? 
--
1974 GT160
1971 CV19
1973 CV16
1969 V143

Online Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 13462
Re: 1969 V143 Jet Flight Engine considerations
« Reply #3 on: February 27, 2021, 01:17:33 PM »
That's a very nice V143 !
Charts I have lists .. 
1974  Merc I4 50 HP / 43.8 ci. at 173 lbs. without tilt & trim.
1974  Merc I4 65 HP / 49.8 ci. at 183 lbs. without tilt & trim
1974  Merc I4 85 HP / 66.8 ci. at 234 lbs. without tilt & trim
1974  Merc I4 /115 & 135 HP / 99.8 ci  at 273 lbs. without tilt & trim.

The 1988 Merc I6 115 HP is 312 lbs. with tilt & trim

Most Johnson / Evinrude's three cylinders (50 thru 75 HP) motors are about 250 lbs.
Most J/E V4's are about 310 lbs.

Online Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 13462
Re: 1969 V143 Jet Flight Engine considerations
« Reply #4 on: February 27, 2021, 01:36:59 PM »
What year is your Merc 90 HP motor ?

You can find the Glastron P.I.G.'s here, with some HP to speed ratings.
Your V143 is very lite compared to the "Aqua-Lift II" hulls.

https://www.glastron.com/uploads/2017/3/1972-Glastron-PIG.pdf

Offline ars71

  • Newbie
  • *
  • Posts: 6
    • American Runabouts
Re: 1969 V143 Jet Flight Engine considerations
« Reply #5 on: February 27, 2021, 02:44:16 PM »
Thanks a lot gentlemen,
the 90 is a straight 6 Tower of Power from the early 80s (need to check the number)
--
1974 GT160
1971 CV19
1973 CV16
1969 V143

Offline carlsoncvx18

  • Donate members
  • Hero Member
  • *****
  • Posts: 1588
Re: 1969 V143 Jet Flight Engine considerations
« Reply #6 on: February 27, 2021, 04:50:37 PM »
I would think the old johnsrude in-line 3cyl would be a good motor. Just like the picture.
1987 CVX18.     1968 Glastron alpha sail boat
1977 GT150
1986 CV23
1984 Intimiadator
1981 CV27
1969 V-180 fundeck

Offline HerbJetflite

  • Newbie
  • *
  • Posts: 12
Re: 1969 V143 Jet Flight Engine considerations
« Reply #7 on: March 08, 2021, 08:52:06 PM »
Hi ars71
I have a 1961 Jetflite powered by an Evinrude Starflite III rated at 75hp.
I've run it since I bought it new in 1962 with no issues.
Needs the right prop to pull skiers.

Herb
grtj47a@aol.com

PS The 2017 Glastron meeting should have pictures of the boat.