Minnesota Classic Glastron Forum

General Category => General Discussion => Topic started by: JThomas36 on March 09, 2022, 09:26:50 PM

Title: CVX 18 Ski pole mount
Post by: JThomas36 on March 09, 2022, 09:26:50 PM

I wanted to share some pics of my Ski pole mount rebuild after getting assistance from the Forum. Pretty easy with basic welding skills. The Pole itself was a little more challenging but all worked out in the end.

Title: Re: CVX 18 Ski pole mount
Post by: Hyperacme on March 09, 2022, 09:33:30 PM

Came out great !
Do you mind if I add it to the "Vendor and Repair Resources" section ?

Title: Re: CVX 18 Ski pole mount
Post by: JThomas36 on March 09, 2022, 09:40:13 PM

Please do.  I have tons of pics and I used the instructions I found on the Forum. 

Title: Re: CVX 18 Ski pole mount
Post by: carlsoncvx18 on March 10, 2022, 05:37:14 AM

Awesome job.  Looks like the one in my intimidator.

Title: Re: CVX 18 Ski pole mount
Post by: Glastronjohn18 on March 11, 2022, 12:32:23 PM

Great Job. Is that a 1/4 turn mount or another securement method?

Title: Re: CVX 18 Ski pole mount
Post by: JThomas36 on March 11, 2022, 09:04:03 PM

1/4 turn.  Did the pole myself. Came out good for fist effort as a machinist!!! I found the pole on Ebay for $30 bucks.  I will try again with a little longer pole.  This one is a little stubby and will have close clearance to the awesome scoop with the Ski rope.   We'll see.