Author Topic: CVZ19 Info and parts needed  (Read 2633 times)

0 Members and 1 Guest are viewing this topic.

Offline gpxzcat

  • Newbie
  • *
  • Posts: 1
CVZ19 Info and parts needed
« on: March 09, 2014, 12:10:20 PM »
Morning all....  New here and looked like a great place to get info and locating parts for my CVZ19. Just picked it up last fall and have not yet run it on the lake. Has a small hole in the hull from the trailer rolling down a hill and hitting a pickup so have glasswork to do first. Did get the motor running and the tilt/trim fixed.
Wondering what the HP rating is for this boat and what kind of speeds it is capable of? Currently has a 150 Merc v6 motor with a 21pitch stainless prop. Have a 225 on the stand so can upgrade if needed.

Looking for interior parts as well as a driver side rail tube...... mine was cut to put a trolling motor on the bow.
Also wondering if all the CVZ's were supposed to come with a ladder? Mine is missing and would like to put one on if I can locate.

Also, any good ways to remove stains on the vinyl seats? Boat had water up about 15" in the boat for an extended time when I purchased it so seats have some staining on them.

Have a small corner broke off one of the windshields.... not really bad but not perfect either so may replace depending on the the remainder of the boat turns out. Any out there???? Could even use a broken one and mend them together....

Would even be interested in a parts boat.... received a link to one down south but have not gotten a response back so probably already sold.

Will post pics once the snow goes down out here.

Any assistance is greatly appreciated.

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 13327
Re: CVZ19 Info and parts needed
« Reply #1 on: March 09, 2014, 12:17:56 PM »
Welcome to the forum gpxzcat !

Keep an eye on the GCOTD thread for parts boats ...

http://forum.cgoamn.com/index.php?topic=1077.0

Great lakes skipper might have some of the stuff your looking for ...

http://greatlakesskipper.com/

Windshields ...

http://www.updplastics.com/glastron%20boat%20windshields.htm
« Last Edit: March 09, 2014, 12:21:47 PM by Hyperacme »

Offline dorelse

  • Administrator
  • Hero Member
  • *****
  • Posts: 5988
Re: CVZ19 Info and parts needed
« Reply #2 on: March 10, 2014, 01:14:16 PM »
Not all CVZ's (or CVX's for that matter) came with ladders.

We love pictures here, so please post some, or email the club (cgoamn@gmail.com) and we'll get them posted for you.

Welcome to the club!
1990 Sierra 1700

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 13327
Re: CVZ19 Info and parts needed
« Reply #3 on: March 11, 2014, 12:09:36 AM »
Doran
He's the guy that post the ad on CL. for CVZ / CVX parts and info.
He's from ND and boat is buried under snow.
Said he would post some pictures after the snow melts.

Glastron Carlson Parts Needed (MN)
http://minneapolis.craigslist.org/hnp/boa/4363948325.html

Offline dorelse

  • Administrator
  • Hero Member
  • *****
  • Posts: 5988
Re: CVZ19 Info and parts needed
« Reply #4 on: March 11, 2014, 12:23:06 AM »
k, next question...where in ND?

Sent from my WP8 phone using Tapatalk
1990 Sierra 1700

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 13327
Re: CVZ19 Info and parts needed
« Reply #5 on: March 11, 2014, 12:25:47 AM »
Dirk and he's from Arthur, ND

"Thanks.... will do but need some snow to melt before I can get any pics of it.... under 9 ft drifts right now..... been a loooonnnggg winter.  Take care."
Dirk