Author Topic: Upholsterer's  (Read 8264 times)

0 Members and 2 Guests are viewing this topic.

Offline Rosscoe

  • Hero Member
  • *****
  • Posts: 4444
Upholsterer's
« on: January 22, 2013, 11:04:20 AM »
http://www.kmcustomupholstery.blogspot.com/

I found an upholsterer less then a mile from me who does nice, reasonable work. I removed the damaged rear seat back out of my 67 bayflite about 2 years ago. I cut a new piece of wood and bought some foam but had a hard time getting the old original vinyl wrapped nicely. Decided to have it professionally done. Also brought Mark some carpet scraps from the new carpet I installed in the 71 Crestflite as it was fraying when I cut it. Had him cut it using the originals as templates. Had some of the edge finished on that as well. 40.00 bucks! I will be going back there for other interior work. Not real handy for many of you but it may be worth the drive.
K&M Upholstery
Shafer, Minnesota
Owner. Mark
« Last Edit: May 29, 2015, 10:45:41 AM by dorelse »
Ross
61 Surflite 1964 90HP Johnson project
67 V163 Bayflite Super Sport  1989 100HP Merc
67 V164 Bayflite 120HP
67 V174 Crestflite Rat Rod
71 V175 Crestflite 350ci -Jet
73 GT 160
84 CVX 17  83 115 Merc
88 CVX-23 350 Mag

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 13464
Re: Upholsterer
« Reply #1 on: January 22, 2013, 07:07:40 PM »
Shawn ( fireman24mn) wrote ....

Here is the web site for the guy that did mine. It looks great and when finished the price did not change. I will probabaly have him do the 23. Unless I attempt it myself.

http://www.samsonupholstery.com/

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 13464
Re: Upholsterer
« Reply #2 on: June 03, 2013, 09:01:49 PM »
Kip had his done here ..

Jerry's Upholstery
http://jerrysupholsteryofminnesota.com/

Offline dorelse

  • Administrator
  • Hero Member
  • *****
  • Posts: 5987
Re: Upholsterer
« Reply #3 on: May 29, 2015, 10:45:11 AM »
We were contacted by this business and asked to be added to our list. 

Canvasworks, Inc
VOSB – Veteran Owned Small Business
PO Box 247
245 Cokato St E
Cokato, MN 55321
320-559-0165
www.canvasworksincmn.com
www.encloseyourtrailer.com
www.custommcseats.com
1990 Sierra 1700

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 13464
Re: Upholsterer's
« Reply #4 on: September 19, 2015, 05:53:03 PM »
Dave CVX16 wrote ...

I have used Vince at United Textiles in Oakdale twice and am pleased with his work and reasonable prices. Vince cut the carpet and sewed the seam on the flooring of the Glastron V-153 back in about 2010.

This spring Vince repaired the boat cover to the CVX16, restitching the seams of the yellow vinyl backing under the windshield area, but then went on to restitch all the seams across the boat and making a patch for a small hole in the canvas. For this work he charged a very reasonable price. He does solid, quality work and has time to explain it all to you.

Vince does upholstery for boats also.

Vince
United Textiles
1360 Helmo Ave. N.
Oakdale, MN 55128
651-702-4228

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 13464
Re: Upholsterer's
« Reply #5 on: July 10, 2016, 10:32:50 AM »
Allan Pfromm started a new business in Prescott WI.
He also does vinyl custom lettering.
« Last Edit: July 10, 2016, 10:44:40 AM by Hyperacme »

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 13464
Re: Upholsterer's
« Reply #6 on: August 29, 2017, 07:41:41 AM »
From Tonka Jim ...

I had it made.
I called around 5 canvas fabricators around the Twin Cities for a 10' X 8' cockpit cover.
Everyone quoted me $1,000.00 to $1,100.00.
Permatop, in Mound, MN (Lake Minnetonka) quoted me $650.00. They got the job.

http://www.permatop.com/

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 13464
Re: Upholsterer's
« Reply #7 on: February 23, 2018, 10:57:51 PM »