Minnesota Classic Glastron Forum

General Category => General Discussion => Topic started by: Luv2win on July 16, 2022, 07:42:53 AM

Title: Thru Hull Exhaust Install
Post by: Luv2win on July 16, 2022, 07:42:53 AM

Starting to install a Moore performance thru hull muffler exhaust .
Just to add a little rumble lol.

Title: Re: Thru Hull Exhaust Install
Post by: Plugcheck on July 16, 2022, 08:57:43 AM

Depends on exhaust routing and clearance, but you could make it "Captains call". Another favorite is to align the tips so they are in the water at idle, but out when on plane.   Some have placed them roughly halfway in the water for their desired exhaust note.   

Title: Re: Thru Hull Exhaust Install
Post by: Luv2win on July 16, 2022, 09:56:22 AM

On the Scimitar I can only put it thru the upper corners in the dog house. The power steering assembly is really close on the left .
I didn't want the Captains call.
Putting Dennis mufflerd exhaust . But I'm sure ill have to modify it some around the steering.
The mufflers didn't show up yesterday like they said . More pix as I go.

Title: Re: Thru Hull Exhaust Install
Post by: Glastronjohn18 on July 16, 2022, 05:26:43 PM

I put Moore Thru hulls with the muffled tips on my CVX18. Tips are in the water at idle, out when on plane. The muffled tips give a good exhaust note yet 
are reasonably quiet enough to permit conversation while underway. I think you'll like them.


(https://hosting.photobucket.com/albums/a494/glastronjohn18/CVX18/86CVX/.highres/IMG_1510_zpsorbl9x6w.jpg)


(https://hosting.photobucket.com/albums/a494/glastronjohn18/CVX18/86CVX/.highres/IMG_1502_zpscciautbn.jpg?width=450&height=278&crop=fill)   


Here's a video.



https://www.youtube.com/watch?v=RAs17gmEyfc (https://www.youtube.com/watch?v=RAs17gmEyfc)

Title: Re: Thru Hull Exhaust Install
Post by: Luv2win on July 16, 2022, 06:12:40 PM

Super nice CVX John. Sounds good to.

Title: Re: Thru Hull Exhaust Install
Post by: Glastronjohn18 on July 18, 2022, 12:23:51 PM

Can't wait to see and hear how your install comes out.

Title: Re: Thru Hull Exhaust Install
Post by: Luv2win on July 18, 2022, 05:40:43 PM

Just Finished up Mufflers didn't get here till today.

Look up the hole you can see it lines up good to the manifold.

Title: Re: Thru Hull Exhaust Install
Post by: Luv2win on July 18, 2022, 05:45:47 PM

And the test fit / Install.
Was pretty easy install . Hope to test it out tomorrow .  ;D

Title: Re: Thru Hull Exhaust Install
Post by: Luv2win on July 18, 2022, 05:47:31 PM

Couple more clamps and were good to go.

Title: Re: Thru Hull Exhaust Install
Post by: carlsoncvx18 on July 18, 2022, 06:50:46 PM

There are S pipes designed to clear the power steering.  They put the 4? exhaust about 3/4 under the water line at idle.  They come out a little bit lower than the ones on Glastron John.

Title: Re: Thru Hull Exhaust Install
Post by: Luv2win on July 19, 2022, 12:24:54 PM

It's pretty quiet even when you rev it up . Hope to go to the lake later today .
Have to finish my stone work on my house first.

Trying to upload a video but it won't take it. I cut it down to 13 sec too.

Title: Re: Thru Hull Exhaust Install
Post by: Hyperacme on July 19, 2022, 02:06:18 PM

I think you'll have to upload video to something like "Youtube" then post link here ..

Title: Re: Thru Hull Exhaust Install
Post by: Luv2win on July 19, 2022, 06:35:37 PM

The Moore performance exhaust is perfect . The sound is really nice idling and still quiet in the cabin while WOT .
Got lots of looks tonight .
5200 RPM @ 58 mph . Good enough for a old boat.
Sorry I don't know how to put up a video . I think the file is to large. I even trimmed it down to 13 secs lol.

Title: Re: Thru Hull Exhaust Install
Post by: Glastronjohn18 on July 20, 2022, 08:47:15 PM

Looks Good!
 Before installing the mufflers I coated the exposed plywood with gelcoat, resin/acetone should work as well, than bedded  them with 3M 4200.

As far as videos, I opened an account with YouTube, uploaded the video to my account than copied and pasted the page url to my post.