Author Topic: New MN Member  (Read 7467 times)

0 Members and 1 Guest are viewing this topic.

Offline S2000

  • Newbie
  • *
  • Posts: 8
New MN Member
« on: January 26, 2018, 10:49:41 AM »
Greetings,
I stumbled across this forum and thought it worthwhile to participate. I have owned a green 1974 GC CV16SS 140Hp Mercruiser since 1980 and reside near Nisswa MN. Those who boat in that area may have seen my boat on the Gull Lake chain. I also own a Malibu Response LX.
Jim K 

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 13463
Re: New MN Member
« Reply #1 on: January 26, 2018, 11:03:09 AM »
Welcome to the forum Jim !
Would love to see pictures of your CV.

Offline S2000

  • Newbie
  • *
  • Posts: 8
Re: New MN Member
« Reply #2 on: January 26, 2018, 11:18:56 AM »
Gregg,
At this point I don't know how to post pics on this forum but I would be happy to email them to you if you provide me with an address.

Jim

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 13463
Re: New MN Member
« Reply #3 on: January 26, 2018, 11:36:38 AM »
To add pictures ...

At bottom click on "Attachments and other options"
Then click "Browse"
From the drop down screen direct to where you store your picture.
Double click picture and it will attach.
Click the " (more attachment)" to add more pictures.
Some pictures taken with cell phones are huge and will take some time to up load.
You can only attach four (4) pictures per post.

Offline S2000

  • Newbie
  • *
  • Posts: 8
Re: New MN Member
« Reply #4 on: January 26, 2018, 12:16:06 PM »
Thanks for the instructions
jk

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 13463
Re: New MN Member
« Reply #5 on: January 26, 2018, 02:54:07 PM »
Jim's 1974 CV16SS ...

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 13463
Re: New MN Member
« Reply #6 on: January 26, 2018, 02:55:57 PM »
More ..

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 13463
Re: New MN Member
« Reply #7 on: January 26, 2018, 02:56:59 PM »
More ...

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 13463
Re: New MN Member
« Reply #8 on: January 26, 2018, 02:57:49 PM »
Last one ...

Offline thedeuceman

  • Administrator
  • Hero Member
  • *****
  • Posts: 3356
Re: New MN Member
« Reply #9 on: January 26, 2018, 03:11:07 PM »
That is one nice lookin boat Jim


Sent from my iPhone using Tapatalk Pro
Joe
75 GT150 "SeaDeuced"... Its Back !!
92 16CSS "Attitude Adjustment" is for sale
75 CV-16V8, Project
74 CV-16... its Purple !

Offline 75starflight

  • Hero Member
  • *****
  • Posts: 3517
Re: New MN Member
« Reply #10 on: January 26, 2018, 04:47:07 PM »
beautiful boat Jim!
1975 v-179 starflite

Offline carlsoncvx18

  • Donate members
  • Hero Member
  • *****
  • Posts: 1588
Re: New MN Member
« Reply #11 on: January 26, 2018, 05:06:32 PM »
Nice cv16ss there Jim.

JASON Check the Glastron cave make sure yours is still there!
1987 CVX18.     1968 Glastron alpha sail boat
1977 GT150
1986 CV23
1984 Intimiadator
1981 CV27
1969 V-180 fundeck

Offline Plugcheck

  • Donate members
  • Hero Member
  • *****
  • Posts: 3267
Re: New MN Member
« Reply #12 on: January 26, 2018, 05:20:42 PM »
 Thought it was Jason's.   So when will we see a photo of twins x2
Michael
1979 CVZ-18 388 CI Vortec Mouse
1980 CVX-16SS 140 Mercruiser
1979 CVX-16 Johnson 175
2002 Bennington 2275CC 90 Mercury
1985 Intimidator project
1989 Lowe 200 Redneck fishin Toon
2001 Godfrey Sweetwater pontoon 115 Rude

Offline Oldfishguy

  • Donate members
  • Hero Member
  • *****
  • Posts: 452
Re: New MN Member
« Reply #13 on: January 26, 2018, 06:44:35 PM »

Welcome.

Someone north of me finally! Nice looking machine.

David
Clearwater
1972 1/2 Glastron CV 16
1973 Chrysler 120

Offline Jason

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 5564
  • 1974 CV16SS, 1986 CV23
Re: New MN Member
« Reply #14 on: January 26, 2018, 09:28:16 PM »
Wow! Very cool! Never thought I’d see her true twin. We will be on the whitefish lake chain for a week in June. Might to go over to gull lake for a day to meet up. Welcome!
Jason S.
1974 Glastron Carlson CV16SS 140 I/O
1986 Glastron Carlson CV23 260 I/O

Offline S2000

  • Newbie
  • *
  • Posts: 8
Re: New MN Member
« Reply #15 on: January 27, 2018, 09:58:41 AM »
Thanks Gregg for posting the photos - and thanks everyone for the nice comments. As I told Gregg in a email, the boat needs some TLC in a few areas to make it really nice, but for the most part, it is in pretty good shape and it runs fine.
 Last Fall I purchased a direct drive Malibu Response LX because we need room for additional people - hence the CV may go up for sale. We've owned the CV for 38 years and it will be hard to see it go. I've told my wife that if we sell it I hope I never see it on the Gull Lake Chain, but then, maybe it would be cool to see it again. Surprisingly, that boat draws a lot of attention, almost every time we take it out.
jim

Offline Oldfishguy

  • Donate members
  • Hero Member
  • *****
  • Posts: 452
Re: New MN Member
« Reply #16 on: January 27, 2018, 10:25:23 AM »
Thanks Gregg for posting the photos - and thanks everyone for the nice comments. As I told Gregg in a email, the boat needs some TLC in a few areas to make it really nice, but for the most part, it is in pretty good shape and it runs fine.
 Last Fall I purchased a direct drive Malibu Response LX because we need room for additional people - hence the CV may go up for sale. We've owned the CV for 38 years and it will be hard to see it go. I've told my wife that if we sell it I hope I never see it on the Gull Lake Chain, but then, maybe it would be cool to see it again. Surprisingly, that boat draws a lot of attention, almost every time we take it out.
jim

I was wondering the history on that machine, you definitely cared for it.  Once you let it go though you will NEVER find another one in that condition.  All of this clubs boats are used and not garage queens, so none of them are perfect.  Saying that, I believe you have a family heirloom there.  Think about it before selling.

Now, if you do sell, I think the Club members would appreciate a first go. Any one of this groups members would appreciate it as much as you do.

David
« Last Edit: January 27, 2018, 11:03:33 AM by Oldfishguy »
1972 1/2 Glastron CV 16
1973 Chrysler 120

Offline S2000

  • Newbie
  • *
  • Posts: 8
Re: New MN Member
« Reply #17 on: January 27, 2018, 11:58:18 AM »
David,
The boat was purchased new from Waterloo Boat & Motor (no longer in business), Waterloo, IA. We acquired it in 1980 from the original owner after my dad purchased a lake home on the Gull Lake Chain in 1979. The purchase included all the original documentation, Glastron and Mercruiser owners manuals, and I still have most of the repair receipts that I've collected over the years. During the first few years the boat saw a lot of water activities. That, combined with the fact that the boat sat on a non-canopy Shorestation for the first couple of years, resulted in a deteriorated floor in the rear, which I replaced and re-glassed in the early '80s. That is why you see a center carpet seam cover in some of the photos. Not all of the carpet was replaced. The floor is still very solid but I ensure that it does not remain wet for very long. Also, sometime during the mid '80s the raw water pump impeller went bad resulting in a cracked cylinder wall. The engine was then sleeved and completely overhauled at that time. Come to find out that those Chevy/Mexican blocks were not of the best quailty castings and are extremely sensitive to abrupt temp changes. I don't believe that the temp gauge ever exceeded 190, but it evidently does not take much. I keep a very close watch on it now. The engine starts and runs great and it's been a number of years since the plugs and even the breaker points have been changed. As I told Gregg, there is some fading on the transom where the sun reflects off the water. The seat bases need to be recovered and there are a few other minor items that need TLC. That pretty much explains it all.

In regard to selling it: My daughter just purchased a lake home not far from us and she has much more garage space than she needs - hence I have a place to store and work on the CV - so I'm in no hurry to get rid of it. However, at my age, the accumulation and maintenance of more 'stuff' is becoming a much bigger issue than it once was. Know this. If I do decide to sell, this group will be the first to know about it, and I would feel really good knowing that it would be well cared for by whoever purchased it. If someone is really interested, I can always entertain offers.

Jason,
In regard to your visit to my area in June: I don't know if it will happen but how cool would that be to see two identical CV16SS's travelling together on the water. Talk about an attention getter.

Offline carlsoncvx18

  • Donate members
  • Hero Member
  • *****
  • Posts: 1588
Re: New MN Member
« Reply #18 on: January 27, 2018, 03:00:08 PM »
Jim

I will be up in July 20 and 21 staying at Maddens for a wedding..

Will be bring a boat along not sure which one yet but plans are for her and I to spend all day Friday
Enjoying a ride around Gull lake.

Never have been on the lake but some suggestion of places to go and see would be appreciated.

Thanks Jeff
 
1987 CVX18.     1968 Glastron alpha sail boat
1977 GT150
1986 CV23
1984 Intimiadator
1981 CV27
1969 V-180 fundeck

Offline S2000

  • Newbie
  • *
  • Posts: 8
Re: New MN Member
« Reply #19 on: January 27, 2018, 04:14:20 PM »
Jeff;
Maddens is at the south end of the lake and since you will be staying there, 'Ernies' would be a good spot for you to boat to, also on the southern end of the lake. My first choice. They've got decent food, beverage of your choice, and most important, decent boat slips. It's a good place to relax outside, along the shoreline and people watch, boat watch, or whatever. We boat there a couple of times a year for something to do. On the north end of the lake there is Bar Harbor, a fancier dining spot, excellent boat parking, and outside seating. We very seldom go there because the food is too expensive for what it is. A bit further north of Bar Harbor is Zorbaz, basically a pizza place. We've only been there once and the boat parking really sucks. Just south of Ernies there is a sand bar that a lot of people hang out at, if you're into that sort of thing. Maddens is a nice place, especially if you are a golfer. Enjoy yourself!