General Category > Vendor and Repair Resources

Glastron/Carlson rub rails

(1/2) > >>

Hyperacme:
Should fit most boats ...
If you know of others please post, and I'll add to thread ...

BEST OPTION ...
Eagle Moldings V-744-BK is Perfect snug fit ..Looks great!
https://eagle-aluminum.com/product/vinyl-rub-rail-insert/
You can contact Grace Wuollet @Eagle Moldings to order: (763) 493-2995

*************

Wefco ...
http://www.wefcorubber.com/


*************

Rub Rails.com  ...
http://www.rubrails.com/


************

Eagle Mouldings ...
http://eagle-aluminum.com/


***********

TACO Marine
https://tacomarine.com/rub-rail?gad_source=1&gclid=CjwKCAjww_iwBhApEiwAuG6ccDWEcj1yZhujIhWxMGwCMjwepVFji6uO89bWIMu5YypN8_I_TJvHnRoCuLkQAvD_BwE

**********

Barbour Plastics, Inc.
https://www.barbourmarine.com/rubrails_trim.php


*********


GR?NDL-BOOTSIMPORT ..
https://shop.gruendl.de/Decksausruestung/Scheuerleisten/Aluminium-Profil-38-mm-24-Meter-4-x-6-Meter-24-Meter-Aluminium-Profil-38mm.html?listtype=search&searchparam=Scheuerleiste

Hyperacme:
Pictures & measurements

Carlson_from_Germany:
We have a company here in Germany that has the original rubrail. If anyone is interested I could order a few hundred yards and have it shipped ;-)

JetLife:
Hello G/C folks!

Shedding some light on a new rub rail vinyl insert for my 1978 Glastron Carlson CV23.

The Taco V12-0303 looked like it would be a close replacement, but proved to be too loose once installed. (See photos-read photo name)

I could not obtain samples from WEFCO. Note: WEFCO is rubber, not vinyl. 

The Eagle Moldings V-744-BK is THE TICKET! Perfect snug fit! Looks great! (See photos-read photo name)
What you see in the photos is a 1 foot sample piece to show the cross section and installed fit. I subsequently purchased 57' to go around my boat. (27' each side with 3' as spare)
You can contact Grace Wuollet @Eagle Moldings to order: (763) 493-2995    Grace@Eagle-Aluminum.com

Hope this helps!

Mark Priglmeier

JetLife:
Just a note: Eagle Moldings V-744-BK vinyl rub rail insert worked GREAT on my 1976 CV-19ss and my friends CV-16. Remember to heat with a hairdryer or heat gun for easy installation. This IS the stuff. Mark

Navigation

[0] Message Index

[#] Next page