Minnesota Classic Glastron Forum

General Category => Classified / Wanted to Buy => Topic started by: Jamms on June 17, 2018, 10:59:14 PM

Title: wanted CV16 steering wheel
Post by: Jamms on June 17, 2018, 10:59:14 PM

I am looking for a friend he has a 73 CV-16 and he is needing a steering wheel
a 3 spoke wheel with the 4 holes in the spokes. I know this photo is not the greatest.
Thanks Jamms

Title: Re: wanted CV16 steering wheel
Post by: Hyperacme on June 18, 2018, 09:16:47 AM

Wheel was used on many other brands of boats .. Maybe eBay / Craigslist parts / Facebook Glastron groups.
Not sure if they still have some wheels .. but … try sending PM to Ray or Steve.
Ray
http://forum.cgoamn.com/index.php?action=profile;u=277 (http://forum.cgoamn.com/index.php?action=profile;u=277)
Steve
http://forum.cgoamn.com/index.php?action=profile;u=1590 (http://forum.cgoamn.com/index.php?action=profile;u=1590)

Title: Re: wanted CV16 steering wheel
Post by: Jamms on June 18, 2018, 06:40:47 PM

thanks Gregg I will try them

Title: Re: wanted CV16 steering wheel
Post by: Jamms on June 24, 2018, 11:02:12 PM

I found a steering wheel

Title: Re: wanted CV16 steering wheel
Post by: Hyperacme on June 25, 2018, 10:18:05 AM

If you need a new center decal … Not sure if this is the one you would need .. But …

Steering wheel center alumin. decal 1,85" (4,7cm) Glastron and Glastron Carlson
https://www.ebay.com/itm/Steering-wheel-center-alumin-decal-1-85-4-7cm-Glastron-and-Glastron-Carlson-/163104613414?_trksid=p2141725.m3641.l6368 (https://www.ebay.com/itm/Steering-wheel-center-alumin-decal-1-85-4-7cm-Glastron-and-Glastron-Carlson-/163104613414?_trksid=p2141725.m3641.l6368)

Another element which I made during renovation works on my GT-150!
Replica of steering wheel center cap' decal with G logo made from aluminium.

Fits to:
- Glastron GT-150, GT-160, V-140, V-143, V-145, V-149, V-153,V-156, V-162, V-163, V-166, V-169, V-170, V-173, V-174, V-176, V-177, V-178, V-179, V-182, V-184, V-186, V-196, V-197, V-212, V-214, V-215, V-234
- Glastron Carlson CH-16, CV-16, CV16ss, CV-19, CV-21,

The diameter is 1,85" (4,7 cm).

The alluminium decal was digitally printed on an aluminium plate anodised with 28 microns coating. One square centimetre of the plate features several thousands of microscopic holes, into which the image is imprinted. After printing, the
round emblem is treated with high temperature. The process closes the holes and seals the image while creating hard, chemically resistant layer of enamel. The plate is simply indestructible.

A steering wheel is not offered on this auction. An object of the auction is only a round black aluminium decal with G logo.