Author Topic: winch for 80s model Glastron trailer for cvx 18  (Read 3875 times)

0 Members and 1 Guest are viewing this topic.

Offline 1988cvx18

  • Newbie
  • *
  • Posts: 5
winch for 80s model Glastron trailer for cvx 18
« on: July 17, 2017, 12:49:34 PM »
I am looking for someone who has an original Glastron trailer from the 80s for a 1988 Cvx 18. I need to replace the winch on the trailer that I re- conditioned, and the old one was too rusted out for more to get any part number info for a replacement. I posted once before, but unfortunately, the info that several of you gave to me didn't help when I contacted some boat trailer part places. Any help would be appreciated. Thanks.

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 13464
Re: winch for 80s model Glastron trailer for cvx 18
« Reply #1 on: July 17, 2017, 01:09:20 PM »
Does trailer and winch look like this ?

Offline 1988cvx18

  • Newbie
  • *
  • Posts: 5
Re: winch for 80s model Glastron trailer for cvx 18
« Reply #2 on: July 17, 2017, 02:38:02 PM »
Unfortunately, this particular response we received before & did not help Fulton winches when we called. The winch we need has to fit underneath & have a 3 & 1/2 in width at the base of the winch. This particular model shown in the picture has a 4in base according to Fulton brand winches & does not fit on the trailer properly.

Offline carlsoncvx18

  • Donate members
  • Hero Member
  • *****
  • Posts: 1588
Re: winch for 80s model Glastron trailer for cvx 18
« Reply #3 on: July 17, 2017, 02:40:11 PM »
Hmm ok I didn't measure mine sorry
1987 CVX18.     1968 Glastron alpha sail boat
1977 GT150
1986 CV23
1984 Intimiadator
1981 CV27
1969 V-180 fundeck

Offline 1988cvx18

  • Newbie
  • *
  • Posts: 5
Re: winch for 80s model Glastron trailer for cvx 18
« Reply #4 on: July 17, 2017, 02:46:31 PM »
No need to be sorry... We were unaware that there were so many different sizes & configurations for the base to fit properly & for the bolt holes to match up. Most winches we have checked on are too big & we can't seem to find one under 4 in that will work for an 18 ft boat.

Offline Plugcheck

  • Donate members
  • Hero Member
  • *****
  • Posts: 3267
Re: winch for 80s model Glastron trailer for cvx 18
« Reply #5 on: July 17, 2017, 10:13:49 PM »
I recently restored a mid eighties Conroy(Glastron) trailer, the thread is on the site somewhere.  The old winch is a Fulton T1802, and is 3.875" wide.  I replaced that with a new Fulton that I cannot locate a model number on right now, maybe it's on the bottom of it.  It measures out to be 3.565" wide.  The channel it sits in is approximately 4.5" wide.  It does have several spacer shafts to allow for not cutting a semicircle in the trailer structural component.  My best advice would be to get the measurements of the old one, and do some research to find one that fits.  I had to build a new handle for mine, so it's likely that an exact replacement may no longer be available, and a bit of customizing may be in order.
Michael
1979 CVZ-18 388 CI Vortec Mouse
1980 CVX-16SS 140 Mercruiser
1979 CVX-16 Johnson 175
2002 Bennington 2275CC 90 Mercury
1985 Intimidator project
1989 Lowe 200 Redneck fishin Toon
2001 Godfrey Sweetwater pontoon 115 Rude

Offline Allblueacr

  • Full Member
  • ***
  • Posts: 82
Re: winch for 80s model Glastron trailer for cvx 18
« Reply #6 on: November 02, 2020, 03:11:30 PM »
resurrecting this thread... need a winch to fit up and in the 3.5" (smidge wider) wide channel on a cvx 18 ( mines an 1985)

There are hundreds on the web but none have base mount measurements. If anybody has one that they can share a number off of I can start there...

thanks
1985 CVX18 260 Alpha One

Offline Plugcheck

  • Donate members
  • Hero Member
  • *****
  • Posts: 3267
Re: winch for 80s model Glastron trailer for cvx 18
« Reply #7 on: November 02, 2020, 06:23:53 PM »
Look at etrailer.com, they post specs.
Michael
1979 CVZ-18 388 CI Vortec Mouse
1980 CVX-16SS 140 Mercruiser
1979 CVX-16 Johnson 175
2002 Bennington 2275CC 90 Mercury
1985 Intimidator project
1989 Lowe 200 Redneck fishin Toon
2001 Godfrey Sweetwater pontoon 115 Rude

Offline Allblueacr

  • Full Member
  • ***
  • Posts: 82
Re: winch for 80s model Glastron trailer for cvx 18
« Reply #8 on: November 03, 2020, 05:50:36 PM »
Look at etrailer.com, they post specs.

Been there, they post some specs but not mounting plate dimensions that we could find
1985 CVX18 260 Alpha One

Offline Plugcheck

  • Donate members
  • Hero Member
  • *****
  • Posts: 3267
Re: winch for 80s model Glastron trailer for cvx 18
« Reply #9 on: November 04, 2020, 08:16:08 AM »
The factory original on my trailer was a T1802 which crosses to a 142306, both Fulton's.   My only other suggestion would be to call etrailer or fulton.  In the end though, I had to make some modifications to the supposed direct replacement to fit and wind correctly. 
Michael
1979 CVZ-18 388 CI Vortec Mouse
1980 CVX-16SS 140 Mercruiser
1979 CVX-16 Johnson 175
2002 Bennington 2275CC 90 Mercury
1985 Intimidator project
1989 Lowe 200 Redneck fishin Toon
2001 Godfrey Sweetwater pontoon 115 Rude

Offline Allblueacr

  • Full Member
  • ***
  • Posts: 82
Re: winch for 80s model Glastron trailer for cvx 18
« Reply #10 on: December 07, 2020, 06:48:06 PM »
Redone
1985 CVX18 260 Alpha One

Offline Plugcheck

  • Donate members
  • Hero Member
  • *****
  • Posts: 3267
Re: winch for 80s model Glastron trailer for cvx 18
« Reply #11 on: December 07, 2020, 06:58:53 PM »
Only trailer I have with a 2 speed winch is the pontoon trailer.   Both trailers for the glastrons are single speed.  Is that a replacement or restoral?
Michael
1979 CVZ-18 388 CI Vortec Mouse
1980 CVX-16SS 140 Mercruiser
1979 CVX-16 Johnson 175
2002 Bennington 2275CC 90 Mercury
1985 Intimidator project
1989 Lowe 200 Redneck fishin Toon
2001 Godfrey Sweetwater pontoon 115 Rude

Offline Allblueacr

  • Full Member
  • ***
  • Posts: 82
Re: winch for 80s model Glastron trailer for cvx 18
« Reply #12 on: December 09, 2020, 05:21:25 PM »
restoral of what was on there. Could not find one to fit within the channel. I t does the job and now looks better
1985 CVX18 260 Alpha One