So it's been a long time since I posted last, summer is super busy and haven't had much time working on the boat
Was able to get the stringers cut and the wax coating removed and I'm ready to glass them in.
I have also done a little experiment with a small chunk of the left over LVL (laminated veneer lumber). From research and others opinions online there has been warning about the glue in them not holding up to moisture, so I took a chunk and threw it in a bucket of water and left it for the better part of 2 months.
Well the wood soaked up the water, as most wood/plywood would. But the glue is still firmly holding it all together. I cannot break it apart by hand. So i feel pretty comfortable in the decision with the LVL. It'll be a good strong hull, along with sealing everything up well and keeping it dry I'm sure it'll last a long time.
Few pics on them below.