Author Topic: Fun Deck. (Read 2466 times)

carlsoncvx18 · « **on:** January 02, 2024, 05:25:25 PM »

Brought it home for a 2024 project. Got it in the garage and started to tear it down. Need to remove the o/b then a little surgery and the top should be able to come off.

Glastronjohn18 · « **Reply #1 on:** January 02, 2024, 05:49:17 PM »

Looks like it's in decent shape, or are there issues that can't be seen. Anyway it looks to be a nice winter project.

Hyperacme · « **Reply #2 on:** January 02, 2024, 08:16:18 PM »

That motor would be perfect for a GT150

Hyperacme · « **Reply #3 on:** January 03, 2024, 10:33:20 AM »

You can get decal's here ... https://www.ebay.com/itm/145432229355?hash=item21dc6fb5eb:g:tEgAAOSw7XBgcDzj

I think he can make the " V180 " letters ... https://www.ebay.com/usr/gt-150pilot

He's a member here and on Facebook groups .. https://forum.cgoamn.com/index.php?topic=6394.0

Others ... https://forum.cgoamn.com/index.php?topic=7978.0

Silver GT-150 · « **Reply #4 on:** January 03, 2024, 10:46:44 AM »

Sweet boat! Looking forward to updates.

Hyperacme · « **Reply #5 on:** January 03, 2024, 05:49:49 PM »

1967 -1969 Glastron emblem ..

https://www.boatsign.de/en/shop/14-glastron/glastrons/32-glastron-67-en

Rosscoe · « **Reply #6 on:** January 04, 2024, 06:27:11 AM »

Very cool Jeff. Not many of those around.

Sent from my iPhone using Tapatalk

thedeuceman · « **Reply #7 on:** January 07, 2024, 08:27:01 PM »

Sent from my iPhone using Tapatalk Pro

Hyperacme · « **Reply #8 on:** January 07, 2024, 10:58:54 PM »

That's one heck of a big stringer !

thedeuceman · « **Reply #9 on:** January 08, 2024, 09:43:06 AM »

It has four stringers, those are the inside ones, there is still about 4 inches of them left in the hull, had to cut them out to access the outer two stringers to get them separated from the cap. For the most part, the stringers are good, the rear section of the outer stringers the bottom was rotten, and the foam is wet.

Sent from my iPhone using Tapatalk Pro

carlsoncvx18 · « **Reply #10 on:** January 21, 2024, 05:33:04 PM »

Stringers and transom out

carlsoncvx18 · « **Reply #11 on:** January 21, 2024, 05:34:35 PM »

Ready to start grinding

Hyperacme · « **Reply #12 on:** January 21, 2024, 07:36:00 PM »

Fun Deck grinding booth ...

Rosscoe · « **Reply #13 on:** January 21, 2024, 07:56:48 PM »

Not so fun deck. Man, don?t you ever tire?

Sent from my iPhone using Tapatalk

carlsoncvx18 · « **Reply #14 on:** January 23, 2024, 08:58:42 PM »

Did a little grinding tonight. One more night and the worst is over.

carlsoncvx18 · « **Reply #15 on:** January 27, 2024, 06:04:46 PM »

Grinding is done. Started to fab up transom and stringers

carlsoncvx18 · « **Reply #16 on:** January 27, 2024, 06:06:23 PM »

2center stringers

carlsoncvx18 · « **Reply #17 on:** January 27, 2024, 06:09:36 PM »

Then 2 outboard stringers.
The original stringers were made out of 3/8 plywood. Went with 1/2 marine grade as it is in stock at Menards.
Could get 3/8 but it would be special order and the same price as 1/2.

Rosscoe · « **Reply #18 on:** January 27, 2024, 06:23:20 PM »

What are you going to power it with Jeff?

Sent from my iPhone using Tapatalk

carlsoncvx18 · « **Reply #19 on:** January 27, 2024, 06:50:02 PM »

It was a ob. Converting it over to a I/o. Using a 3.0 Ltr 140hp mercruiser.