Author Topic: Glastron/Carlson rub rails  (Read 5650 times)

0 Members and 1 Guest are viewing this topic.

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 12765
Glastron/Carlson rub rails
« on: January 18, 2013, 07:07:19 PM »
Should fit most boats ...
If you know of others please post, and I'll add to thread ...




Wefco ...
http://www.wefcorubber.com/

*************
Rub Rails.com  ...
http://www.rubrails.com/

************
Eagle Mouldings ...
http://eagle-aluminum.com/

***********

Eagle Moldings V-744-BK is Perfect snug fit ..Looks great!
https://eagle-aluminum.com/product/vinyl-rub-rail-insert/
You can contact Grace Wuollet @Eagle Moldings to order: (763) 493-2995

***********

GR?NDL-BOOTSIMPORT ..
https://shop.gruendl.de/Decksausruestung/Scheuerleisten/Aluminium-Profil-38-mm-24-Meter-4-x-6-Meter-24-Meter-Aluminium-Profil-38mm.html?listtype=search&searchparam=Scheuerleiste
« Last Edit: January 18, 2022, 05:30:24 PM by Hyperacme »

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 12765
Re: Glastron/Carlson rub rails
« Reply #1 on: February 10, 2017, 01:26:14 PM »
Pictures & measurements

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 12765
Re: Glastron/Carlson rub rails
« Reply #2 on: March 22, 2019, 11:22:06 AM »
Hull / deck joints
« Last Edit: December 17, 2021, 07:27:09 PM by Hyperacme »

Offline Carlson_from_Germany

  • Donate members
  • Hero Member
  • *****
  • Posts: 431
Re: Glastron/Carlson rub rails
« Reply #3 on: November 24, 2019, 01:11:23 AM »
We have a company here in Germany that has the original rubrail. If anyone is interested I could order a few hundred yards and have it shipped ;-)

Offline JetLife

  • Newbie
  • *
  • Posts: 11
  • 1978 Glastron Carlson CV23 460 Jet “Pepper Spray”
Re: Glastron/Carlson rub rails
« Reply #4 on: January 11, 2022, 10:34:27 AM »
Hello G/C folks!

Shedding some light on a new rub rail vinyl insert for my 1978 Glastron Carlson CV23.

The Taco V12-0303 looked like it would be a close replacement, but proved to be too loose once installed. (See photos-read photo name)

I could not obtain samples from WEFCO. Note: WEFCO is rubber, not vinyl. 

The Eagle Moldings V-744-BK is THE TICKET! Perfect snug fit! Looks great! (See photos-read photo name)
What you see in the photos is a 1 foot sample piece to show the cross section and installed fit. I subsequently purchased 57' to go around my boat. (27' each side with 3' as spare)
You can contact Grace Wuollet @Eagle Moldings to order: (763) 493-2995    Grace@Eagle-Aluminum.com

Hope this helps!

Mark Priglmeier