Author Topic: Glastron SSV-151 Parts wanted  (Read 6151 times)

0 Members and 2 Guests are viewing this topic.

Offline doodlez93

  • Newbie
  • *
  • Posts: 12
Glastron SSV-151 Parts wanted
« on: May 31, 2017, 04:13:27 AM »
Hey guys,   :)

i need your help beacuse in Germany its hard to find parts for my boat or my engine.
In my boat there is a fuel filter i need to change... well it looks like a filter :D But the boat is in Spain so i cant search for a number.
Can you tell me where i can find a filter like this ?

Oh and if you have any affordable parts you dont need anymore please message me because i want to restore this beauty as fast as possible.  :-[

Greets
Carsten

Edit: Oh any the engine has some problems... When i drive full throttle aber a few seconds it looses a lot of power and needed nearly double of fuel... if i stop the engine and start it again it works a another few seconds till i looses power again. Any ideas ? I dont think that its just the filter. Greets

Edit 2: Of it looks more like a water seperator  ???
« Last Edit: May 31, 2017, 06:20:55 AM by doodlez93 »
Glastron SSV-151 with 140 PS Suzuki (DT140) 2 Stroke Outboarder

Offline Rich_V174SS

  • Hero Member
  • *****
  • Posts: 2074
  • 1967 V174 Crestflite SuperSport Modified
Re: Glastron SSV-151 Parts wanted
« Reply #1 on: May 31, 2017, 06:21:42 AM »
First, update to a newer/better fuel filter from a marine supply store. It doesn't have to be like the original.

Second, your carburetor and fuel system is probably all plugged up with debris from the fuel tank restricting fuel demand. I suggest you clean out or replace the fuel tank and go through the whole fuel system and carburetor.
1967 V174 Crestflite SuperSport Modified
1987 Mercruiser 190 3.7LX/Alpha One

1970 V176 Swinger
1983 Mercury 115

Offline doodlez93

  • Newbie
  • *
  • Posts: 12
Re: Glastron SSV-151 Parts wanted
« Reply #2 on: June 01, 2017, 01:23:39 AM »
Well I'm still not sure if it is a filter :D It looks more like a water seperator... but i cant find this one in the internet  ???

And to replace the fuel tanks would be expansive and not that easy i think. I should clean it like you say but how? Just with fuel ? Or with something special?

Greets
Glastron SSV-151 with 140 PS Suzuki (DT140) 2 Stroke Outboarder

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 13464
Re: Glastron SSV-151 Parts wanted
« Reply #3 on: June 01, 2017, 06:57:47 AM »
You want something like this ...
https://www.westmarine.com/buy/racor--10-micron-spin-on-series-fuel-filter-water-separator-o-b-320--484964?recordNum=1

Do a "Google" search for ... "cleaning old fuel tank".
There are a few methods, depending on rust or sludge.

Offline 75starflight

  • Hero Member
  • *****
  • Posts: 3517
Re: Glastron SSV-151 Parts wanted
« Reply #4 on: June 01, 2017, 08:51:10 AM »
That filter looks like something that came off of an old tractor that was used back in the 1940s/50s. Those were a filter of sorts, but it looks like yours has seen better days. I would agree on upgrading to a newer style.

Also, I work for an implement dealer and when our shop tech clean an old fuel tank they flush it out with a power washer with heat and use a heavy detergent through the power washer. They stick the power washer gun in the fill or sender hole and just brace the gun in place and let it spray for a couple hours.
1975 v-179 starflite

Offline Plugcheck

  • Donate members
  • Hero Member
  • *****
  • Posts: 3267
Re: Glastron SSV-151 Parts wanted
« Reply #5 on: June 01, 2017, 09:15:38 AM »
     The glass bowl filters were popular  to visually check contamination and water, many were equipped with a petcock to drain off the water.  In some applications they may be OK, maybe in a vintage application, but I would recommend its replacement with a finer filter/water separator in a marine application.   If you cannot or wish not to pull the tank, then possibly Brandon's recommendation is notable.  There are many products available to clean, and then coat the tank before re-use, but you must pull the tank to do this.  Given the condition of the current filter, I'd say there is likely some rust/contamination in the tank.  If it were me, I'd add a simple in-line metal filter at the tank, then a marine filter/separator at the engine so that its weight is not stressing the tanks fitting.
Michael
1979 CVZ-18 388 CI Vortec Mouse
1980 CVX-16SS 140 Mercruiser
1979 CVX-16 Johnson 175
2002 Bennington 2275CC 90 Mercury
1985 Intimidator project
1989 Lowe 200 Redneck fishin Toon
2001 Godfrey Sweetwater pontoon 115 Rude

Offline Rich_V174SS

  • Hero Member
  • *****
  • Posts: 2074
  • 1967 V174 Crestflite SuperSport Modified
Re: Glastron SSV-151 Parts wanted
« Reply #6 on: June 01, 2017, 08:29:01 PM »
The glass bowl filters were basically a sediment filter. There is a screen at the top to prevent debris from going to the engine.
1967 V174 Crestflite SuperSport Modified
1987 Mercruiser 190 3.7LX/Alpha One

1970 V176 Swinger
1983 Mercury 115

Offline doodlez93

  • Newbie
  • *
  • Posts: 12
Re: Glastron SSV-151 Parts wanted
« Reply #7 on: June 02, 2017, 04:35:47 AM »
Thanks to you all for your help.

Okay i have searched a little bit and i think i will buy this one ... if i find out if it is 3/8" or 5/15" because i dont know ..

http://www.ebay.de/itm/Benzinfilter-Wasserabscheider-mit-Schauglas-fur-Mercury-Yamaha-Filter-9-5mm-/331779138890?hash=item4d3f93e54a:g:QlwAAOSwKtVWwjBj

http://www.ebay.de/itm/Benzinfilter-Wasserabscheider-Schauglas-fur-Yamaha-8mm-Anschluss-Benzin-Filter-/332065573738?hash=item4d50a68b6a:g:EgQAAOSwBahVW2lx

In these are filter included ... Plugcheck said i shoud buy an in-line metal filter too... is it necessary then?
And do you know how i can find out which size i have/need  ::) ::) ::)
Greets
Glastron SSV-151 with 140 PS Suzuki (DT140) 2 Stroke Outboarder

Offline Plugcheck

  • Donate members
  • Hero Member
  • *****
  • Posts: 3267
Re: Glastron SSV-151 Parts wanted
« Reply #8 on: June 02, 2017, 07:49:23 AM »
    I do like the 2nd unit selected, seems it would be a bit tougher since it only has a small clear bowl to check and drain water, but the other would appear to work as well.   The idea of using a separate in line filter would be if you didn't want to pull your tank or clean it out.   The 10 micron filter will plug up quickly if there is a lot of debris/rust/contamination in the tank.  A cheap inline filter, metal, would provide a coarse filter before the 10 micron unit, and is cheap enough to replace often.   I would still recommend putting the 10 micron filter near the carb as fuel line does break down over time, and even copper and steel lines have proven to release junk into the fuel system.   Last thing, mount the new filter against something sturdy and not just off the tank, bouncing around in the boat could cause the fitting on the tank to break loose.  The metal filter is in line, so the rubber lines help absorb the shock.    Hope I explained it better.   Guten tag mein freund.
Michael
1979 CVZ-18 388 CI Vortec Mouse
1980 CVX-16SS 140 Mercruiser
1979 CVX-16 Johnson 175
2002 Bennington 2275CC 90 Mercury
1985 Intimidator project
1989 Lowe 200 Redneck fishin Toon
2001 Godfrey Sweetwater pontoon 115 Rude

Offline doodlez93

  • Newbie
  • *
  • Posts: 12
Re: Glastron SSV-151 Parts wanted
« Reply #9 on: June 06, 2017, 02:02:12 AM »
Hey, maybe a stupid question but how can i find out how large the connections need to be  ::)
I am not sure if these are 8mm (5/16") oder 9.5mm (3/8") and i can't just drive to spain to have a look  ;D
Glastron SSV-151 with 140 PS Suzuki (DT140) 2 Stroke Outboarder

Offline Plugcheck

  • Donate members
  • Hero Member
  • *****
  • Posts: 3267
Re: Glastron SSV-151 Parts wanted
« Reply #10 on: June 06, 2017, 07:35:21 AM »
     Any size markings on the hose?   Next best would be to pull the hose off the current filter and measure the hose and/or fitting. 
Michael
1979 CVZ-18 388 CI Vortec Mouse
1980 CVX-16SS 140 Mercruiser
1979 CVX-16 Johnson 175
2002 Bennington 2275CC 90 Mercury
1985 Intimidator project
1989 Lowe 200 Redneck fishin Toon
2001 Godfrey Sweetwater pontoon 115 Rude

Offline dorelse

  • Administrator
  • Hero Member
  • *****
  • Posts: 5987
Re: Glastron SSV-151 Parts wanted
« Reply #11 on: June 06, 2017, 08:54:38 AM »
     Any size markings on the hose?   Next best would be to pull the hose off the current filter and measure the hose and/or fitting.

Boats in Spain...he's in the UK...so he can't do either of those things.

Hmm..some might know, but you'd probably want to find another owner of an SSV-15x model and have them check.  Bob Morit's on here and has one.
1990 Sierra 1700