Author Topic: new guy from Indiana  (Read 111 times)

0 Members and 1 Guest are viewing this topic.

Offline tubie8420

  • Newbie
  • *
  • Posts: 1
new guy from Indiana
« on: November 27, 2017, 06:45:27 PM »
 Just recently purchased my first boat. Its a 1979 glastron carlson cvx-16 super delux. came with a 1979 johnson 150hp v6 on back. sounds like a load of fun and was told it'll do wheelies in the water. however the rear transom has been reinforced with angle iron and glass is cracking. ive been working on repairing the floors as they too are weak. im sure ill catch some static for this but if im gonna repair the rear transom area whats to say ill put an I/O mercruiser 4.3lx in it. ive only ever heard or seen one other person doing this swap but believe it was a 5.7 mercruiser. the donor boat is a 1995 bayliner 2052 with 4.3lx. any information of ideas are welcome.

Offline Oldfishguy

  • Contributing Member 2015
  • Sr. Member
  • *
  • Posts: 337
Re: new guy from Indiana
« Reply #1 on: November 27, 2017, 07:03:14 PM »

First off, welcome!

We all end up redoing our floors and transoms on these machines; as beautiful as they are, it is worth it.  We all do some modern design or material upgrades when we redo things but most of us keep things close to stock.  Mother Glastron/Carlson had the design lines and colors way ahead of there time and most of us donít want to mess with that.  150hp OB is a bit much for a CVX16, and then the thought of converting to an inboard just tells me this will probably be another unfinished project (and it will look like crap without the proper engine cover)

If you want a go fast boat with an inboard. . . buy that boat.

Sorry to sound negative but I am trying to help you get on the water with what will work.

David
1972 1/2 Glastron CV 16
1973 Chrysler 120

Offline Plugcheck

  • Hero Member
  • *****
  • Posts: 1741
Re: new guy from Indiana
« Reply #2 on: November 27, 2017, 07:36:38 PM »
I love a custom as much as the next person, but a first boat with a radical transformation from OB to I/O is a major project to say the least.  Let's assume you have the time, skill, and money to complete the build I'm afraid the project may not handle as well as it could if left closer to stock.  Yeah a 150 is a bit much, but I had a 16 deluxe with Johnson v6-175.  Took it out once, ran hard but barely under control.  Best advice I could give ya, clean this one up and enjoy it, or sell it and find a craft with the basic set up your after. 
Michael
1979 CVZ-18 388 CI Vortec Mouse
1980 CVX-16SS 140 Mercruiser
1979 CVX-16 Johnson 175
2002 Bennington 2275CC 90 Mercury
1985 Intimidator project, gps 85 mph (on trailer)
1989 Lowe 200 Redneck fishin Toon

Offline Jason

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4922
  • 1974 CV16SS, 1986 CV23
Re: new guy from Indiana
« Reply #3 on: November 28, 2017, 09:39:05 AM »
Welcome. I have to say agree with the other guys. You will be money and time ahead just getting an I/O boat if that is what you want. If you want to go 4.3 V6 step up to a V8 CVX18. Not all that hard to find or expensive either.

Otherwise fix the transom, put the 150 on there, and go boating.
Jason S.
1974 Glastron Carlson CV16SS 140 I/O
1986 Glastron Carlson CV23 260 I/O

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 9706
Re: new guy from Indiana
« Reply #4 on: November 28, 2017, 01:43:03 PM »
Welcome to the forum tubie8420 !

Agreed with others, find or rebuild a nice CVX18 / 260 HP if you want an I/O.

Gregg
'76 CV16