Author Topic: bow medalion (Read 12744 times)

welshy · « **on:** August 17, 2015, 06:26:26 AM »

Hi guy's could someone please tell me the actual dimentions of the bow medalion gt150 so i can see about get one made thank's very much --- jon

Hyperacme · « **Reply #1 on:** August 17, 2015, 07:39:56 AM »

Blue line ... about 4 and 1/8 inches.
Red line ... about 3 and 5/8 inches.

welshy · « **Reply #2 on:** August 17, 2015, 02:08:32 PM »

thank's very much for this --- regards jon

Plugcheck · « **Reply #3 on:** August 17, 2015, 02:41:16 PM »

Makinwaves had one made, I suspect not custom, but an aftermarket supplier. He filled it in with color, really looks good. I'll see if he can post a pic.

V153 · « **Reply #4 on:** August 17, 2015, 02:56:25 PM »

Look up RAYAR on the main site. He popped a few while back.

Think Bob Probst said he had a couple originals?

Hyperacme · « **Reply #5 on:** August 17, 2015, 03:24:08 PM »

It would be nice if some one would make an aluminum one, my plastic chrome is starting to peel off.

nes-cv23 · « **Reply #6 on:** August 18, 2015, 06:23:23 AM »

Please make more than one!.. I could use one and I'm sure there are a few more people.

Carlson_from_Germany · « **Reply #7 on:** August 24, 2015, 07:46:52 AM »

Is someone making them now? As you can see in the for sale section we have been reproducing some emblems. Would be worth a try to reproduce them as well.

welshy · « **Reply #8 on:** August 24, 2015, 08:38:19 AM »

Yes your right ''going to go to a machine shop and see how much they will replicate metal base plate for me and if they cheap enough will get a batch done and i wont try and get a badge cast made for the small glastron badge as well now these things are getting rare will let you all know if i have any luck with these !!

Oldfishguy · « **Reply #9 on:** August 24, 2015, 08:06:13 PM »

Quote from: Carlson_from_Germany on August 24, 2015, 07:46:52 AM

Is someone making them now? As you can see in the for sale section we have been reproducing some emblems. Would be worth a try to reproduce them as well.

Any chance of reproducing these in an emblem? About 13 inches in length, I could get more exact and better pictures if need be. It is currently available in a decal form that is very nice, but I would like a few in the raised emblem replica.

Carlson_from_Germany · « **Reply #10 on:** August 25, 2015, 04:06:58 AM »

So you want the whole thing as one emblem or still put the decal inside the metal/plastic frame?

Hyperacme · « **Reply #11 on:** August 25, 2015, 06:07:03 AM »

Never seen a close up of that emblem before, or never looked at it closely ...
Thought it was just a sticker inside a plastic emblem.
WoW ... Built By Carlson ... That's cool !

Is the flag and "G" in the center a decals ?

Carlson_from_Germany · « **Reply #12 on:** August 25, 2015, 10:26:50 AM »

The frame is made out of aluminum (?). It's metal for sure.

Oldfishguy · « **Reply #13 on:** August 25, 2015, 12:26:50 PM »

Quote from: Carlson_from_Germany on August 25, 2015, 10:26:50 AM

The frame is made out of aluminum (?). It's metal for sure.

It is a sticker inside the raised emblem. The sticker is inset about 1/16 of an inch. I am not sure what it is made of, probably not aluminum as it has stayed shiney . . . hard plastic??? The picture is the original, with original decal.

Here is the reproduction decal, about half way down the page.

Thanks

David

http://forum.cgoamn.com/index.php?topic=2694.0

Carlson_from_Germany · « **Reply #14 on:** August 25, 2015, 02:21:40 PM »

I know that some of them were made of metal as I used to have one myself. I'll see what we can come up with. Anyone out the could take a few pics of one with a tape measure on it (preferably cm of course).

cv-19 · « **Reply #15 on:** August 25, 2015, 03:53:12 PM »

Its made of aluminum and the GLASTRON/CARLSON is printed on a decal. The decal is printed on a chrome type material and is stamped to raise the printing.

Oldfishguy · « **Reply #16 on:** August 25, 2015, 04:24:41 PM »

This may be one I just keep hunting for an original. I've called on a few I've seen in the classifieds this last year that look like attached to junk boats, with no luck. I've been meaning to take a few trips to some scrap yards but just haven't had the time this summer.

The two on the boat are good, I'm just looking for a couple for some side "art" projects.

welshy · « **Reply #17 on:** August 25, 2015, 04:31:15 PM »

Thats interesting well worth that hunt as they are so scarse !

cv-19 · « **Reply #18 on:** August 25, 2015, 09:01:19 PM »

Check e bay there is a new listing for the 150 emblem

Hyperacme · « **Reply #19 on:** August 26, 2015, 06:55:56 AM »

New Reproduced 1971-1973 Glastron Carlson GT CV-16 & CV-21 Decal with Backing Listed for charity
Exact Replacement Glastron-Carlson Bow Medallion Decal

Osceola, Wisconsin, United States

http://www.ebay.com/itm/New-Reproduced-1971-1973-Glastron-Carlson-GT-CV-16-CV-21-Decal-with-Backing-/321843966709?hash=item4aef6532f5&vxp=mtr