Minnesota Classic Glastron Forum

General Category => Classified / Wanted to Buy => Topic started by: thedeuceman on August 23, 2018, 12:33:08 PM

Title: CV23 hatch screw brackets
Post by: thedeuceman on August 23, 2018, 12:33:08 PM

i need to reproduce one of these for someone cuz the aftermarket ones don't fit just right.
i can make 1 out of stainless manually but...

Im gonna put this out there to see if there is any interest.
we could code it for the CNC and make a few @ $20 each (proceeds all go to the machinist)

so i have 2 questions
1, are the 2 latches the same or are they mirror image? (in regard to the counter sunk mounting holes)
    pay no attention to the 2 extra holes drilled in the unit
2, is the slot actually 5/16 wide?

we could make them with no holes or with 4 symmetrical holes

they will be machined from 316 stainless, sharp edges broke and parts will be passivated to prevent rust. 

thanks
Joe

Title: Re: CV23 hatch screw brackets
Post by: thedeuceman on August 23, 2018, 12:34:23 PM

(https://uploads.tapatalk-cdn.com/20180823/d076bec0533e7d5be73447545dc74eb2.jpg)


Sent from my iPhone using Tapatalk Pro

Title: Re: CV23 hatch screw brackets
Post by: thedeuceman on August 23, 2018, 12:45:52 PM

I should also mention, if the quantity goes up price will come down


Sent from my iPhone using Tapatalk Pro

Title: Re: CV23 hatch screw brackets
Post by: Jason on August 23, 2018, 12:51:30 PM

I don't need one but I can get some measurements for you.

Title: Re: CV23 hatch screw brackets
Post by: fireman24mn on August 23, 2018, 12:56:41 PM

Stop by and look at mine if you need measurements or if you need to pull it and bring it to work thats fine. I won't be using the boat till next weekend.

Title: Re: CV23 hatch screw brackets
Post by: Tonka Jim on August 23, 2018, 08:19:32 PM

They do not use counter sunk bolts

Title: Re: CV23 hatch screw brackets
Post by: Jason on August 25, 2018, 02:55:27 PM

Yes. 5/16 wide.

(https://uploads.tapatalk-cdn.com/20180825/791457b07853bffff80f8841c1e95cfc.jpg)

Title: Re: CV23 hatch screw brackets
Post by: Jason on August 25, 2018, 02:55:51 PM

(https://uploads.tapatalk-cdn.com/20180825/246deb019d7ea2a741a190605cdc099e.jpg)