Minnesota Classic Glastron Forum

General Category => Classified / Wanted to Buy => Topic started by: demian5 on September 20, 2019, 03:18:30 PM

Title: WTB: Teak Strips for CVX-16 SS
Post by: demian5 on September 20, 2019, 03:18:30 PM: Hi Im looking for a set of teak strips for a 79 CVX-16 SS. The 3 strips on each side for boarding the craft from the stern.

OR maybe someone has dimensions for them so I could make my own?

Thanks in advance for any info or leads.
Title: Re: WTB: Teak Strips for CVX-16 SS
Post by: David CVX-16 on September 21, 2019, 03:46:52 PM: Are your present teak strips removed? If so, is there a difference in the metal flake shading so that you can use the shading as a template.

I have a CVX-16, but do not know if the dimensions are the same.

Let me know if you need measurements.
Title: Re: WTB: Teak Strips for CVX-16 SS
Post by: demian5 on September 25, 2019, 04:12:39 PM: On the Classic Glastron Owners Facebook group one of the guys gave me decent measurements from an outboard model. I went ahead and used those and made a template from the back of the boat using where I could see the outlines of the slats, for a template. Friend of mine has some scandanavian teak and is going to make me a brand new set.

I'm thinking I will rivet them on unless others say different. I've seen screws and rivets. I do have one hole that looks like it was drilled twice thought.
Title: Re: WTB: Teak Strips for CVX-16 SS
Post by: Plugcheck on September 25, 2019, 05:08:55 PM: Personally, I'd opt for the synthetic mats like Shawn used. No maintenance, and look great for years.
Title: Re: WTB: Teak Strips for CVX-16 SS
Post by: Hyperacme on September 25, 2019, 05:09:59 PM: I would think there would be less chance of cracking wood if counter sunk and screwed.
Title: Re: WTB: Teak Strips for CVX-16 SS
Post by: demian5 on September 25, 2019, 06:17:40 PM: Quote from: Hyperacme on September 25, 2019, 05:09:59 PM
I would think there would be less chance of cracking wood if counter sunk and screwed.

You got pictures of those??
Title: Re: WTB: Teak Strips for CVX-16 SS
Post by: demian5 on September 25, 2019, 06:18:05 PM: Quote from: Hyperacme on September 25, 2019, 05:09:59 PM
I would think there would be less chance of cracking wood if counter sunk and screwed.

That's good info. Thanks.
Title: Re: WTB: Teak Strips for CVX-16 SS
Post by: Hyperacme on September 25, 2019, 07:11:48 PM: No .. I do not ..
Title: Re: WTB: Teak Strips for CVX-16 SS
Post by: Terry_Curran on September 25, 2019, 09:01:46 PM: Quote from: demian5 on September 25, 2019, 06:17:40 PM
You got pictures of those??

Is this what you’re asking about? These were on my SSV-191 deck boat that I sold.
Title: Re: WTB: Teak Strips for CVX-16 SS
Post by: demian5 on September 27, 2019, 09:02:12 AM: Yeah but on the CVX-16 SS hull a couple things are different it seems. The ends are cut at an angle with the body lines and they are held in with 4 screws each.

Would anyone know what screws I would use and if I would put nuts on the back or just screw into the fiberglass?

This is what the holes in my hull look like now.
Title: Re: WTB: Teak Strips for CVX-16 SS
Post by: demian5 on January 21, 2020, 12:22:06 PM: Ended up making them. I have the templates we used if anyone can use them to make theirs.