Minnesota Classic Glastron Forum
General Category => Classified / Wanted to Buy => Topic started by: Jason on September 22, 2013, 10:32:04 PM
-
Saw this today just south of Fredric WI on hwy 35.
(http://img.tapatalk.com/d/13/09/23/sare4yvu.jpg)(http://img.tapatalk.com/d/13/09/23/ehyqa5a2.jpg)(http://img.tapatalk.com/d/13/09/23/3uqe9a5a.jpg)
-
I just talked to him, wants $500 with trailer, $250 without.
-
Looks like all the important parts are there ...
Low ball him Joe !
Little more room then the GT150 for camping gear ....
... LOL
-
You can't believe how hard it was not to offer him $100 over the phone.
"I don't need another project…
I don't need another project…
I don't need another project…
I don't need another project…"
But I still want it really bad, Maybe the lack of flake is the dealbreaker :/
-
You could get that ($100) for the (Hard to find) seat bases !
-
But I still want it really bad, Maybe the lack of flake is the dealbreaker :/
I know how to paint Flake!
-
But I still want it really bad, Maybe the lack of flake is the dealbreaker :/
I know how to paint Flake!
He's not lying - his flake job was A-M-A-Z-I-N-G
-
I kno...
I can see it sparkle from my house
-
You could get that ($100) for the (Hard to find) seat bases !
From what I can see in the pictures, those seat bases are all broken up. What he needs is a set of NOS seat bases.
Terry
-
You could get that ($100) for the (Hard to find) seat bases !
From what I can see in the pictures, those seat bases are all broken up. What he needs is a set of NOS seat bases.
Terry
Do you still have those terry?
-
Yes I do Brandon.
Terry
-
One seat base had no cracks but would need to be painted. The other seat base had some cracks.
Windshield looked PERFECT!
Floor looked shot. Transom probably needed worked. Was lined with aluminum on the inside but the outside looked straight.
-
I think $200 for the boat would be a good deal, it needs a modern trailer anyway, easy to come up with when ya got a little time to shop, they are a great little boat.
-
That trailer is too small for the boat and isn't worth $250. So I agree buy the boat & let him keep his trailer.
-
I should be there about 1:30 today to pick it up
:D
"Another one saved"
-
I should be there about 1:30 today to pick it up
:D
"Another one saved"
Good man Joe!
-
Good save Joe !
There's about 3 or 4 GT160 rebuilds going on now at CGOA ...
http://www.classicglastron.com/phpbb/viewtopic.php?f=28&t=9445 (http://www.classicglastron.com/phpbb/viewtopic.php?f=28&t=9445)
http://www.classicglastron.com/phpbb/viewtopic.php?f=28&t=9439 (http://www.classicglastron.com/phpbb/viewtopic.php?f=28&t=9439)
http://www.classicglastron.com/phpbb/viewtopic.php?f=28&t=7904 (http://www.classicglastron.com/phpbb/viewtopic.php?f=28&t=7904)
http://www.classicglastron.com/phpbb/viewtopic.php?f=28&t=9441 (http://www.classicglastron.com/phpbb/viewtopic.php?f=28&t=9441)
-
(http://img.tapatalk.com/d/13/09/29/nerynubu.jpg)
-
You two make a beautiful couple !
-
WELL ?
Is gel OK ?
Soft spots in floor ?
Transom mush ?
Plexy wind shield OK ?
-
It was raining when I picked it up, and still is so I have not checked it out yet.
Got it for $200
He also has this
(http://img.tapatalk.com/d/13/09/29/eja8ema9.jpg)
(http://img.tapatalk.com/d/13/09/29/5u8u4evy.jpg)
(http://img.tapatalk.com/d/13/09/29/5ape7uda.jpg)
And he thought he had a GT150 at "the farm"
-
Should have grabbed the "Jetson" light !
You can never have to many Jetson lights ... LOL
Seating arrangement should be better then the GT150's lay out ...
-
WELL ?
Is gel OK ?
Spider cracks, cracks around transome, bad spot (hit) on bow above rub rail
Soft spots in floor ?
Mostly ok
Transom mush ?
Totally
Plexy wind shield OK ?
Vary good, slight bend in side bars.
Seat pans are rough but prob salvageable
Can't find a hull number :/
Sea Deuced is happy to have a big brother :)
-
Look under deck, about here .... It's glassed over so hard to see ...
Or behind dash ...
(http://i131.photobucket.com/albums/p286/Hyperacme/CGOAMNpic%203/snspot_zps63dcf77d.jpg) (http://s131.photobucket.com/user/Hyperacme/media/CGOAMNpic%203/snspot_zps63dcf77d.jpg.html)
-
Awesome Joe!
-
If he has a 150 out there ... I'm in need of a windshield. I have all the framework, but my plastic is shot. If he's got the boat cheap, maybe I can offer half for the windshield only ... I wouldn't want to have to get rid of a boat. Unless .... I could get some steel work done on it and make it a giant floating grill to tow around to the beaches ...
-
Looks like it has potential Joe, congrats!
Dan, I've got the (paper) template for the GT150 windshield if you need it, you're welcome to borrow it.
-
Should have grabbed the "Jetson" light !
You can never have to many Jetson lights ... LOL
Seating arrangement should be better then the GT150's lay out ...
I made one good one out of the two I ended up with. Its funny that many of the parts were not interchangeable. I happened to end up with another one when I got my stuff from NY
Nice grab Joe. It looks to be worth restoring. I've been a fan of 160's for some time. Hopefully you wont have to completely redo everything.
Does this move the X19 down the list? ;D
-
Should have grabbed the "Jetson" light !
You can never have to many Jetson lights ... LOL
Seating arrangement should be better then the GT150's lay out ...
I made one good one out of the two I ended up with. Its funny that many of the parts were not interchangeable. I happened to end up with another one when I got my stuff from NY
Nice grab Joe. It looks to be worth restoring. I've been a fan of 160's for some time. Hopefully you wont have to completely redo everything.
Does this move the X19 down the list? ;D
It will be a complete rebuild, I have an idea...
The x-19 is down 1 in the que, I am planing on doing the 91 1900 first, not sure if I can do 2 boats in 1 winter, we will see.
Great news about yer shop.
-
Well you're just gonna have to split her and make it easier on yourself. Let me know when you get to that part if you need a hand.
-
Congrats Joe!! You are like the animal shelter for boats! If I had the space, I would have queue also plus more time to work on them because I would be single....lol. Love the 160, they are very cool.
Rich
-
All tucked away for the winter
(http://img.tapatalk.com/d/13/10/21/pepume6u.jpg)
-
Is that a Corvair on the right?
-
What's the plan for the truck...
-
Yes Doran... you are correct, i think that may be the last one left in his collection (several were lost in a fire a few years ago)
That old chevy is another "may get to it someday" project in waiting.
this is at Laurie's Dads farm in clear lake WI, once he explained to me that he was always afraid of not having something to do or work on.
so there are many projects in waiting there.
-
I had a '65 Monza Coupe. Took Nikki (my gf, now wife) to prom in it...I truly miss that car.
-
Shell Lake huh. Surprised you are not into Shell Lake boats. Not sure when they quit making those boats but maybe she was still there. I had a 66 Shell Lake.
-
Shell Lake Boat Company
Shell Lake, Wisconsin
http://www.fiberglassics.com/library/Shell_Lake (http://www.fiberglassics.com/library/Shell_Lake)