Author Topic: Another Prop to the Collection (Read 154767 times)

David CVX-16 · « **Reply #40 on:** June 21, 2011, 04:31:02 PM »

Brought three bronze props to Bruce, retired prop shop man in Zimmerman, MN. He repositioned the rubber hubs on two of the props, and stated that the newest acquisition, an e-bay bronze prop, did not need a new hub. He could sense that as he moved the hub around on his press. Also Bruce sold me a different type of thrust washer needed for two of the props. Total cost for labor and parts was $25 plus the 90 mile trip to Zimmerman and back. He is an excellent source for prop repair and welding.

Craigslist ad: Prop and skeg repair, 30 years exp, new and used props for sale,.hub replacement any kind of welding,some motor and lower unit repair,most turn around is a couple of days, work out of my home. Hours are 9 to 5. 763-856-2435, Bruce

Tonka Jim · « **Reply #41 on:** June 21, 2011, 04:41:23 PM »

Quote from: David V-153 on June 21, 2011, 04:31:02 PM

Craigslist ad: Prop and skeg repair, 30 years exp, new and used props for sale,.hub replacement any kind of welding,some motor and lower unit repair,most turn around is a couple of days, work out of my home. Hours are 9 to 5. 763-856-2435, Bruce

David,
You should post this info in Vender section

David CVX-16 · « **Reply #42 on:** June 21, 2011, 05:40:25 PM »

Thanks for the advice Jim, will do.

David CVX-16 · « **Reply #43 on:** June 23, 2011, 10:22:55 AM »

Progress on the e-bay bronze prop. I did not think this one could be restored as it undoubtedly was outside for years. Sanded entire prop to remove stratches and tarnish. Slight imperfection on one of the blades tips. Almost done. Prop may be used by Glastron member who is restoring an old Glastron and Mercury motor.

David CVX-16 · « **Reply #44 on:** June 23, 2011, 11:20:00 PM »

Finished. Before and after photos. This bronze prop from the 1970's will decorate a Glastron and Mercury from the same era.

MarkS · « **Reply #45 on:** June 24, 2011, 04:31:03 AM »

Another awesome job David! You are truly the Propmaster!

Tonka Jim · « **Reply #46 on:** June 24, 2011, 09:18:17 AM »

You are the 'PROPMASTER' David

I hope you will let me try a couple of those out on my SSV sometime soon!

David CVX-16 · « **Reply #47 on:** November 28, 2011, 11:41:28 PM »

Just one more prop to the collection, a Mercury Laser II 22 inch pitch bought on e-bay as used, but shows no signs of wear. Tryed this prop three years ago recording speed of 50 MPH at about 5,000 RPM (vs. 53.5 MPH with 2-blade 21" bronze). But hope that with the replacement 115 HP 1988 Merc at elevated height and with more horesepower, it may work.

Prop collection stands at 10, five stainless steel, four bronze, and one aluminum.

The prop came today by UPS, and tonight Joy and I went to Maplewood Mall to purchase her hair dryer and a pair of boots. She is really happy about the whole day.

Hyperacme · « **Reply #48 on:** November 29, 2011, 05:07:06 PM »

Looks to be in very nice shape Dave ...
Mind if I ask ... How much was it ?

David CVX-16 · « **Reply #49 on:** November 29, 2011, 05:14:49 PM »

Gregg, it was $150.00 plus freight of $15.

The prop was missing one of the vent plugs. Bought one today at Nelson's Marine for $1.50. The plugs come in four sizes, closed hole, and small, medium, and large holes. Mine came with the large holes, about 1/2" in diameter.

If any of my props do not work, Glastron members have first dibs at reduced prices before they go on the market.

Hyperacme · « **Reply #50 on:** November 29, 2011, 05:35:57 PM »

Ya take trade in's Dave ?
Just kiddin' .... LOL

V153 · « **Reply #51 on:** November 29, 2011, 05:48:15 PM »

Nice find David. I still think y'oughta get a SRX & rehub it. But that's it. 11 props is the limit!

One more'n I'm recommending 'Prop-Anon' ...?

V153 · « **Reply #52 on:** November 29, 2011, 06:05:28 PM »

Quote from: David V-153 on November 29, 2011, 05:14:49 PM

If any of my props do not work, Glastron members have first dibs at reduced prices

That's mighty white of you Dave but why would anybody wanna buy a prop that didn't work. Even at a reduced price? Heh heh heh ... JK!

David CVX-16 · « **Reply #53 on:** November 29, 2011, 08:33:55 PM »

I collect props for a purpose, to test them and if they do not work, they are sold. The prop collection will be down in numbers considerably by next fall.

Pictures of people who are serious prop collectors:

Jerry · « **Reply #54 on:** November 29, 2011, 08:46:54 PM »

I have been looking for one. What size shaft and how many splines, what diameter should I be looking for?
I think I may have to get one re-hubed to get what I want.

David CVX-16 · « **Reply #55 on:** November 29, 2011, 08:51:43 PM »

Jerry, are you looking for a prop for the 150 HP Merc Glastron GT160 boat? If so, it should have 15 splines, 13" to 13 3/4" diameter, 20" to 22" pitch, made for a Mercury outboard. Some of my props might work for you, and you are welcome to test them next year.

Jerry · « **Reply #56 on:** November 29, 2011, 09:03:03 PM »

Is it a 1" shaft?
I want 23-24 pitch

David CVX-16 · « **Reply #57 on:** November 29, 2011, 09:20:02 PM »

Jerry, I just measured the prop shaft on one of my props, and it appears to be 1" in diameter. Your lower unit gear ratio is 1.7 to 1, and in my opinion, you should be looking for prop pitches in the 21" to 22" range.

Jerry · « **Reply #58 on:** November 30, 2011, 02:47:35 AM »

You may be right. Old habits are hard to break.

David CVX-16 · « **Reply #59 on:** December 30, 2011, 12:37:59 PM »

Purchased another prop today. This will be my last one. My wife was not too happy. Will post pictures after I get it and get it polished. Used, but in perfect condtion. May work or may not work, only testing will tell.