CVX/CVZ Seat Pedestal

[75starflight]

Now that I am finishing up on Phoenix Rising's upgrade I am finding myself starting to turn my attention to the CVZ project again. Its been quite here at work today so I started looking at seat pedestals. I am wondering if anyone could tell me what the height of the original pedestals would be? I am thinking they are 7.5" with a slight tilt, but I am not sure.

[dorelse]

I can show you pictures of my 'original' seats made from 4x4 treated lumber!!!

[75starflight]

I can show you pictures of my 'original' seats made from 4x4 treated lumber!!!

I have seen those! 

[dorelse]

I purchased some Springfield ones, and just cut them down.

[Glastronjohn18]

Brandon, here's a pic of the pedestal from my CVX.  They do tilt back. Are they the same as the ones in a CVZ?
Not a good view of the tape measure.
Anyway it's 4 3/4in. at the center, 4 1/2 in. at the rear and 5 in. at the front
The base is  7 1/2in. wide and 10 in. long.
The top (were the seat mounts) is 6 1/4 in. square.

[dorelse]

My CVZ-19 had the same seat bases.

[california special]

i cant get my port seat base to stay tight. i tried a lock nut and all. does anyone have the factory specs on the wood measurements on late 70s cvx  seats. mine are aftermarket and too big

[Hyperacme]

BtoB, CV, CVX, GT seats ...
http://forum.cgoamn.com/index.php?topic=3820.0

[Glastronjohn18]

C/S sent you a pm   re: seats
John

[california special]

i would really love to have the seat dementions for the cvx  1976 to 78 the rounded ones not the square with buttons

[Plugcheck]

Sorry Brandon, my z has aftermarket seats that use a flush mount and pin arrangement. Sit really low, but feel like the correct height at speed.  Let me know if you need any pics or dims of my seats.

[75starflight]

I picked up a set of original bases a while back.