Author Topic: GCOTD  (Read 1181837 times)

Hydronut and 1 Guest are viewing this topic.

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 10642
GCOTD
« on: January 26, 2010, 04:34:05 PM »
GCOTD ...






« Last Edit: September 30, 2018, 11:39:01 PM by Hyperacme »
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 10642
Re: GCOTD
« Reply #1 on: September 07, 2018, 11:44:28 PM »
Glastron Carlson Intimidator 1986 - $14900 (Howell)
https://annarbor.craigslist.org/boa/d/glastron-carlson-intimidator/6690236939.html

This Intimidator is super rare as it is totally original and stock, see photos. 20 foot 3 inch length, 60 + MPH Chevy 350 prop boat and it's a bit on the loud side. Before I bought this boat it had been stored in a pole barn for 20 years unused. I have had the boat since 2008. Dual axle shorelander trailer with newer tires and I had it rewired with new LED lights and wheel bearings installed last year. It has a ski pole and comes with a custom cover, skies, tube and ropes included. SERIOUS inquires only please, no trades, cash only, price is firm.
« Last Edit: September 08, 2018, 04:06:31 PM by Hyperacme »
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 10642
Re: GCOTD
« Reply #2 on: September 09, 2018, 12:25:47 PM »
Don't know how I missed this one, been for sale for 22 days !

63 GLASSTRON SABERFLITE V-17 RARE - $3500 (FORT MOHAVE AZ)
https://lasvegas.craigslist.org/boa/d/63-glasstron-saberflite-17/6674468435.html

THERE ARE VERY FEW OF THESE BOATS STILL AROUND, TRANS-DIRECT DRIVE, V8 312 INTERCEPTOR MOTOR, HAVEN'T RAN IT, SIDE DRAFT CARTER CARBS ORGINAL. , INTERIOR NEEDS REDONE, HULL IN GREAT CONDITION. EVERYTHING IS THERE EVEN THE ORGINAL CONSEL. TRAILER IN GOOD SHAPE. DON'T TRY AND BEAT ME DOWN, IF YOU KNOW YOUR GLASSTRON BOATS, YOU KNOW THE REAL VALUE. CALL SCOTT:  $3500 CASH.
NO TEXTING, NO E-MAILS WILL NOT RESPOND, PHONE CALLS ONLY.SAB
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 10642
Re: GCOTD
« Reply #3 on: September 12, 2018, 03:26:22 PM »
1976 Glastron Carlson - $7900 (Cedar, MI)
https://grandrapids.craigslist.org/boa/d/1976-glastron-carlson/6695826993.html

CVX-20 Jet Boat
Awesome classic
Great condition all around including interior
455 Oldsmobile engine
Berkeley Jet drive
Shore Landr single axel trailer

Call Mike .. Do not text or email
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 10642
Re: GCOTD
« Reply #4 on: September 21, 2018, 09:50:03 PM »
All the info I have ..

He said he just bought it and lost his storage spot for it so he needs to sell it now.  $900 
 Says it starts right up. Josh 507-828 -0789
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 10642
Re: GCOTD
« Reply #5 on: September 22, 2018, 08:40:29 PM »
1979 Glastron Carlson CVZ18 / Rochester, MN  /$3500
https://www.facebook.com/marketplace/item/248667952656779/?ref=product_details

1979 Glastron-Carlson CVZ 18. Great looking and running boat! It has a Chevy 350 motor. It has been restored
Gregg
'76 CV16

Offline nes-cv23

  • Hero Member
  • *****
  • Posts: 577
Re: GCOTD
« Reply #6 on: September 23, 2018, 09:06:50 AM »
Look familiar...?  I believe thatís my old cvz-18 I redid in 2014. With new floor, carpet, motor and fresh clearcoat. Turned out nice and still looks good. Itís been at the gatherings a few times. Always had fun with it.  But unless he has put a new motor in it, itís actually a 305 motor out of a 84 Camaro with a marine cam installed. Only had 40k miles on it.
Past to present: 84 ssv-151, 76 cvx-16 ss, 77cvx-20 jet, 90 CSS-19, 77 gt-150, 2-78 cvx-16, 79cvx-16, 79 cvz-18, 78 cv-23, 73 cv-16, 74 cv-18, 89 219 Futura, 76 gt-150 jet.

Offline dorelse

  • Hero Member
  • *****
  • Posts: 5682
Re: GCOTD
« Reply #7 on: September 25, 2018, 06:21:20 PM »
Anyone looking for a Bal Harbor in special order Green?  $1593.00

https://www.facebook.com/marketplace/item/181534912507574
« Last Edit: September 25, 2018, 07:15:47 PM by Hyperacme »

Offline Silver GT-150

  • Sr. Member
  • ****
  • Posts: 199
Re: GCOTD
« Reply #8 on: September 26, 2018, 09:20:49 PM »
1983 Johnson 115 hp. /  $1200
https://minneapolis.craigslist.org/ank/boa/d/115-johnson/6707866725.html

1983 Johnson, runs good 125+- compression on each cylinder, real clean for year, can hear run, will remove from boat once sold. been sitting for a while I would recommend New water pump as usual, but you decide...
« Last Edit: September 27, 2018, 07:01:11 PM by Hyperacme »

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 10642
Re: GCOTD
« Reply #9 on: September 27, 2018, 07:08:07 PM »
More pictures here Ö    http://forum.cgoamn.com/index.php?topic=7876.0

1978 Glastron GT-150.  Completely restored. 115 Mercury engine.  Great trailer. Some accessories included. Clear title in hand. $3,500

The rest of the storyÖ

Iím offering this here first, hoping it goes to a fellow enthusiast rather than some fisherman whoíd mount a trolling motor on the bow or someone who would let it sit outside uncovered.  Iím bringing it to Treasure Island for the meet to use myself or it could be considered ďFree deliveryĒ for a buyer also attending.

This ďBond BoatĒ started as a 1978 silver metalflake boat that had seen better days (trolling motor on bow).  I wanted to make it look like the 1972 boat which made the record setting jump in Live and Let Die so the restoration began.

About 8 years ago I separated the halves and tore it down to a bare shell.  First to go in were new stringers.  Rather than a single piece of ĺĒ plywood, I sandwiched 2 layers of fiberglass between 2 pieces of 3/8Ē ply with staggered joints to get the needed length.  That gave me 6 plies instead of 5.  After coating with a resin/ acetone mix they were glassed in.  I changed the bilge configuration to accommodate a center mounted bilge pump.  I didnít like how the original offset design left some water trapped in the bottom.

The transom was made of 2 layers of coated ĺĒ plywood with a couple layers of fiberglass between the layers, between the hull, and on the face.  I added larger knees tying into the stringers in anticipation of a larger than stock motor.

Next to go in was a ĹĒ plywood floor.  After coating with the same mix it was screwed down using stainless hardware, then I put a layer of fiberglass over the entire thing.  I donít like how carpet traps sand and moisture so I painted everything with alkyd enamel.  No regrets there.  I opted to add vents up front with no foam below the floor to let the floor breathe and hopefully prevent future rot.

The storage locker, toe kicks, and seat bases are all new wood matching the original design and painted with enamel. The storage locker has 12 volt and USB outlets as well as cup holders inside the door.  There is no stereo.

The wood on the original seat uprights were in good shape so I reused them.  I made new seat bases.  I added new foam and had everything covered with new white and silver carbon fiber look vinyl with orange welting.  The back curtain has the Glastron logo embroidered on it and is held down with Velcro.

The paint was all new 3 or 4 years ago.  It is Signature Finish from Fabula in Florida.  I sent the owner some pics of the Bond Boat and he mixed up a special color for me.  Itís a roll on/ brush on application.  I may not have mixed it properly for the conditions and I ended up with a lot of orange peel.  You canít see any roll marks and there are no scratches.  I didnít want to make it worse by trying to wet sand it so I left it as-is.  It looks great from a distance. Lol.  There is a little crack where the transom meets the upper cap.  It not structural, just cosmetic.  Thatís a problem area on the GTís.

While I had the trim off I polished everything to a mirror finish.  It has lost some luster over the years but it still looks better than the original cast finish.  The bilge pump with auto switch, rub rail insert, cleats, bilge pump outlet, stern light and light socket are all new (3 years ago).  The GT-150 badge on the bow is a machined aluminum piece I polished and painted.  It hides a custom 12 gallon aluminum gas tank in the bow.  The football emblems on back are period correct.  I cleaned up and painted those.  The running lights are the cat eye style, one on each side.

I have the gauges that came with the motor.  They are included but not installed yet.  The horn, lights, and bilge switches are new.  The steering wheel matches the style used on the Bond boat and has SS inserts.

The Mercury 115 Tower of Power was installed recently.  It has an integral trim pump so I filled the hole in the splashwell that allowed all the hydraulic lines to go in to an inboard pump.  I added a tilt/trim switch on the cowl so you can tilt the motor while youíre at the back to install the transom saver.  It has a 19 pitch SS prop.  Iíve only had the boat out one weekend with this motor and it ran amazing.  I didnít GPS it but weíre guessing I was in the upper 40ís, low 50ís.  It started chine walking at top speed so it could use some dialing in for stability at top speed.

The trailer got new wheels, tires, bearings, bearing buddies, winch strap, bow stop, transom straps, tongue jack, LED tail-lights, paint and stickers 3 years ago.
Iím also including the orange accessories.  Thereís 2 dock lines, one stretchy dock line (love it), one long rope for tying up onshore, tool box, whistle, 2 flashlights, 2 bumpers with orange ropes, and a paddle.

The restoration was mostly completed 2 or 3 years ago.  Itís been in a heated shop since Iíve owned it.  It hasnít sat in the water more than 3 days at a time a couple of times a year.

I hate to sell it but I need some money to finish up my CV-23 and do some other things.
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 10642
Re: GCOTD
« Reply #10 on: September 27, 2018, 07:10:40 PM »
1972 Glastron GT160 GT-160 / $500 / Clear Lake, WI
https://www.facebook.com/groups/443836755769701/permalink/1132787443541292/?sale_post_id=1132787443541292

1972 Glastron GT-160 boat for sale. Includes Shore Station trailer.
Super cute boat, needs restoration. Like the boats in the James Bond movie!
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 10642
Re: GCOTD
« Reply #11 on: September 27, 2018, 08:05:38 PM »
1989 Glastron Carlson Limited Edition Speed BoatNeeds Fiberglass work! - $2500 (Lake Geneva)
https://racine.craigslist.org/boa/d/1989-glastron-carlson-limited/6707635385.html

Boat Needs Transom Work. Engine and Drive Unit, and rest of the boat has been Meticulously maintained. Winterized and Summarized every single year. Boat is clean!   $2500 Cash Only. Titles in Hand
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 10642
Re: GCOTD
« Reply #12 on: September 28, 2018, 02:00:33 PM »
1971 Glastron GT-160 - $4200 (Gainesville)
https://atlanta.craigslist.org/nat/boa/d/1971-glastron-gt-160/6709036270.html

Selling my classic Glastron, I don't use it as much as I want to and no need for it to sit around. All original boat with a 135hp Mercury also from 1971. The lower drive has a low water pick-up on it. I don't need help selling it and I don't have to sell it. If you send me a low ball offer I will not respond. Cash only.
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 10642
Re: GCOTD
« Reply #13 on: September 28, 2018, 02:47:49 PM »
RARE 1981 GLASTRON CARLSON SKI MACHCHINE 20' - $8500 (DEER PARK)
https://houston.craigslist.org/boa/d/rare-1981-glastron-carlson/6688733177.html

81 GLASTRON
ONE OWNER ON LAKE BIMBROOK SINCE NEW NO SALT WATER EVER, EVERYTHING IS FACTORY AND LOOKS NEW
1982 JOHNSON V6 200HP NEW UPDATED FUEL LINES, BATTERY,WATER PUMP HAVE NEW WATER PUMP IN THE BOX,OIL
1982 TRAILER WITH NEW TIRES RIMS BEARING KITS
TRADES // MACH 1, PRO STREET, CLASSIC STREET ROD, HARLEY (WHAT DO YOU HAVE)
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 10642
Re: GCOTD
« Reply #14 on: September 29, 2018, 11:26:29 AM »
1977 Glastron Carlson $ or trade - $2950 (Lake Alfred)
https://tampa.craigslist.org/hil/boa/d/1977-glastron-carlson-or-trade/6710465211.html

1977 Glastron Carlson
Motor Mariner 115
Compression 112 a 115 on all Cylinders
60 MHP
This boat is in very good condition
$ or trade
Hablamos EspaŮol
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 10642
Re: GCOTD
« Reply #15 on: September 30, 2018, 11:59:27 AM »
CV19 I/O

1974 19' glastron I/0 302 ci. - $2400 (Flint)
https://flint.craigslist.org/boa/d/glastronci/6710324227.html

19' glastron Carlson nice shape for the age. 302ci. Rebuilt Holley Volvo Penta drive. Thru hull exhaust sounds awesome. Original interior in good condition. All gauges work and original except one. West Marine radio and 4 speaker's. Garmin fish finder. Gets much attention top of the line boat back in it's day. Been repainted years ago but looks nice from 10'. Floor is solid. Tandem axel trailer. Needs tires but may be done before sale. Phone calls only show contact info
paul.call for more details please. Thanks.
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 10642
Re: GCOTD
« Reply #16 on: September 30, 2018, 01:08:47 PM »
1988 Glastron CVX 23 to restore inc trailer and some parts. - $1000 (Saint Paul)
https://minneapolis.craigslist.org/ram/boa/d/1988-glastron-cvx-23-to/6710322322.html

I bought this boat with intentions of a complete restoration, and converting it to outboard power. Unfortunately, I don't see myself having the time to do this project for at least a couple years. The boat title is in my name. I'm working through a snag with the trailer title, but should have it in hand soon.

All of the parts shown are presumed working, or unknown, except for the trim pump - it will need a rebuild or replacement.

This will be a great project for someone. With a Chevy 350 repower it should see speeds around 60 MPH. There's nothing quite like a Glastron CV23 / CVX23!
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 10642
Re: GCOTD
« Reply #17 on: September 30, 2018, 06:32:42 PM »
Holy Crap !

RARE OLD ORIGINAL GLASTRON BOAT MARINE ADVERTISING SIGN / Akron, New York, / $2700 + $145 Shipping
https://www.ebay.com/itm/323474509697

ALL I CAN SAY IS WOW, WOW, WOWWW!  I HAVE BEEN  COLLECTING SIGNS FOR 25 YEARS AND HAVE NEVER SEEN THIS SIGN!!! A BOAT SIGN! HOW MANY OF THEM DO YOU SEE THAT ARE EMBOSSED WITH ITS ORIGINAL WOODEN FRAME AND GUARANTEED 100% OLD AND ORIGINAL!!!! JUST A GREAT PIECE OF MARINE ADVERTISING MEASURING 70" X 46"
PLEASE LOOK AT MY OTHER LISTINGS FOR MORE GREAT SIGNS!!!!


Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 10642
Re: GCOTD
« Reply #18 on: September 30, 2018, 06:40:07 PM »
GT150 parts / Menomonee Falls, Wisconsin,

Glastron GT 150 windshield trim bezels / $49
https://www.ebay.com/itm/153199662663

Glastron GT 150 window trim bezels.  These are in very good condition, no cracks anywhere.  They will polish out beautify.  Hard to find a crack free set like this.


***************************

Glastron GT 150 Rub Rail end caps
 https://www.ebay.com/itm/153199685716

Glastron GT 150 rub rail end caps.  These are the cast caps that return the rub rail to the motor well.   No cracks or deep gouges.  These will polish out beautifully.








Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 10642
Re: GCOTD
« Reply #19 on: September 30, 2018, 07:13:54 PM »
1974 gastron 302 alpha 1  /   Waasis, NB   /  $3,500
https://www.kijiji.ca/v-powerboat-motorboat/fredericton/1974-gastron-302-alpha-1/1386704122?enableSearchNavigationFlag=true

23 ft. works great
call or text 2621334
Gregg
'76 CV16