Author Topic: Glastron/Carlson windshields ...  (Read 30227 times)

0 Members and 1 Guest are viewing this topic.

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 11822
Glastron/Carlson windshields ...
« on: February 20, 2012, 11:23:44 AM »
Please add to this if you know of others ...
I'll edit to keep it easy to read.


1976/1987 CV23 = Inside Windshield Dimensions: 64 1/2 L x 0 W x 0 H
1977/1988 CVX 18 & CVX20 = Inside Windshield Dimensions: 73 L x 0 W x 20 H
1979/1980 19ft CVZ = Inside Windshield Dimensions: 40 L x 9 W x 16 5/8 H
1981 C500 & C537 Metric & 1986 CVX 17ft = Inside Windshield Dimensions: 61 L x 21 W x 17 H
1977/1990 CVX16 = Inside Windshield Dimensions: 65 L x 0 W x 16 H             
1977/1980 CVX18 & CVX20 = Inside Windshield Dimensions: 73 L x 0 W x 20 H
1973/1974 CV21 = Inside Windshield Dimensions: 76 L x 16 W x 20 1/4 H
1971/1973 CV19 = Inside Windshield Dimensions: 72 L x 14 1/2 W x 18 1/2 H
1973 CV16SS = Inside Windshield Dimensions: 63 L x 13 W x 11 1/2 H
1974 CV16 = Inside Windshield Dimensions: 63 L x 13 W x 12 3/8 H
1976 CV16 = Inside Windshield Dimensions: 63 L x 13 W x 12 1/4 H
1977 GT150  = Inside Windshield Dimensions: 64 L x 12 W x 11 3/4 H



Masterglas
21405 Hamburg Avenue
Lakeville, MN 55044
(952) 469-5300


American Runabouts
There eBay store ...
https://www.ebay.de/str/americanrunabouts?fbclid=IwAR22vDQJc_s9tAWdTPZiYTeHu87Db6y3eD8NZMpPGtIg3xWlZ6CCavXxIXw



Upd Plastics 60's thru 70's
https://www.updplastics.com/glastron-boat-windshields/


Upd Plastics 70' thru 2000
https://www.updplastics.com/glastron-boat-windshields-1970s-early-2000s/


Crown Plastic inc.  in Plymouth
http://crownplasticsinc.com/


Eaton Quade
http://www.eatonquade.com/main/default.htm



ePlastics.com
http://www.eplastics.com/


Wayne Earl Mfg Inc.
http://www.wayneearl.com/default.asp


Custom Mold & Tint Inc.
http://getaboatwindshield.com/home


The Plastic Guy
http://www.theplasticsguy.com/boat-windshield-gallery.html


Taylor Made , Parts ...
http://www.taylormarine.com/index.html

Wyman Boathouse & Restoration / Cloquet, MN.
http://www.wymanboats.com/?fbclid=IwAR0lGR7cjdRs-uuv9YNL_Ud2-lZQPIiByuMq5MUfTKH2iJSAl9dgtEVaM6o

Finney / Lake Havasu City, AZ
http://www.finneys.com/


For they guys up in the Pacific Northwest there are two companies in Vancouver BC that are an option,

Kren plastics ...
http://www.krenplastics.com/profile.html

Walsh Plastics Ltd ...
http://www.walsh-plastics.com/
« Last Edit: November 20, 2019, 05:42:18 PM by Hyperacme »
Gregg
'76 CV16

Offline Burnin Daylight

  • Hero Member
  • *****
  • Posts: 719
Re: Glastron/Carlson windshields ...
« Reply #1 on: February 20, 2012, 02:41:33 PM »
These guys "Frankie" made the windscreen for Burnin Daylight and the T-tops and winglets for OleReds scimitar.  Frankie also made the custom  LED lit dash and the instrument panel for the larger instruments for Burnin Daylight, so he has the mold for the cvx 20 instrument panel.

http://www.eatonquade.com/main/default.htm
1981 INTIMIDATOR  "BURNIN DAYLIGHT"
1984 CV23  "HOT KNOTS"

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 11822
Re: Glastron/Carlson windshields ...
« Reply #2 on: March 23, 2012, 11:46:10 AM »
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 11822
Re: Glastron/Carlson windshields ...
« Reply #3 on: January 29, 2015, 11:34:41 PM »
CV windshield channel & hardware …

Taylor made .. Glazing Assembly Vinyls
https://www.taylormadeproducts.com/hardware/glazing-assembly-vinyls/

Link to white trim on horsehead_traders eBay store …
https://www.ebay.com/sch/horsehead_traders/m.html?item=361073454913&rt=nc&_trksid=p2047675.l2562





Taylor Made Products Deck Channel White Vinyl 110 In TAY-826500
http://www.jmsonline.net/deck-channel-white-vinyl.htm



Original gaskets,the large one is the bottom and the small is the top that seals the windshield and the channel.






Original next to new Taylor Made channel ...




U-Channel for windshield frames
http://www.allglassparts.com/


Gray vinyl paint for white channel ...
https://www.semproducts.com/marine-refinish/vinyl-coattm

« Last Edit: March 04, 2020, 08:53:28 PM by Hyperacme »
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 11822
Re: Glastron/Carlson windshields ...
« Reply #4 on: January 16, 2017, 10:04:01 AM »
CVX16 / CVX18 / CVX20 windshield hardware

From Joe ...

truss head screw.
http://www.fastenal.com/web/products/details/0170577?searchMode=productSearch&filterByVendingMachine=
the washers are harder to find but allied elec has these, white nylon made for #10 and #12 truss head screws.
http://www.alliedelec.com/search/productdetail.aspx?SKU=70147593&mkwid=sjqzSeszr&pcrid=23493289097&pkw=w-1573&pmt=b&pdv=c&gclid=CI_L28HG9cECFQYFaQod1nIArA


From Chad ...

these might be good to add a more finished look, snap caps.
http://www.homedepot.com/p/Everbilt-10-Black-Hinged-Pan-Head-Screw-Cover-3-Piece-816028/204275903


From Brian ...

There in the electric dep. at manards close to the zip ties and wire nuts. It's what I've used on a couple of my projects. Drill a 3/8"hole in the plexi, put the 1/4" grommets in, then use a 1/4" ss screw-bolt with a nylon nut and just snug them, not to tight so they can flex. Work great!
« Last Edit: January 16, 2017, 10:30:33 AM by Hyperacme »
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 11822
Re: Glastron/Carlson windshields ...
« Reply #5 on: May 11, 2017, 09:37:16 AM »
Thanks to Steven E Johnson ...

Make your own GT / CV windshield.

Just finished stripping and polishing the windshield frame on my CV16. And formed a new windshield from 3/16" Plexiglas using a buck that I made from MDF.

 I will try to explain further.

Remove the original glass.
Using a small amount of spray adhesive, stick a big enough piece of paper to it and trace the outline. Transfer the outline to your new Plexiglas. Cut out using a jigsaw with a fine to medium cut blade on the slow. Slowest speed possible.

 Use your frames to trace the shape for each buck. Start in the center heating up the new windshield to get the first bend.
Tape the glass down to keep it from shifting. Proceed to one side and continue to heat and bend and tape it down as you go. That's pretty much all there is to it.
I was able to drill fast and clean using a cobalt bit for steel.

 Heat gun / Wagner Ferno 750. With a spreader nozzle. About $80.00 at big box store.
 I set the heat at 1300 degrees and kept it moving. Once it's warm enough, it starts to bend on its own.
Tested with scrap in order to know how much heat to use.
Also, I left the protective film on the back side as you can see from the picture.

Wood / MDF: $35.00
Plexiglas: $80.00 (36" x 72")
Gun: $80.00 (but you can pickup a cheaper one for less than $30.00)
All thread, nuts and washers less than $30.00
$225.00 all in.
« Last Edit: May 11, 2017, 01:37:14 PM by Hyperacme »
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 11822
Re: Glastron/Carlson windshields ...
« Reply #6 on: June 13, 2017, 09:03:11 AM »
Rick wrote this about drilling holes in plexi windshields.

Little note on this. The Plexi is very brittle and unforgiving.  I know you will want to bend it into place and drill over and into existing holes. Don't. Any stress on the plastic while you are drilling will send a crack along the bend from the new hole up. Better to mark, flatten out, drill and re-position.  I bought a UDP and it was the right size but too expensive. I think we could start our own pool of drawings.

*R
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 11822
Re: Glastron/Carlson windshields ...
« Reply #7 on: July 11, 2017, 10:23:39 AM »
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 11822
Re: Glastron/Carlson windshields ...
« Reply #8 on: May 07, 2019, 10:30:20 PM »
CVX windshield gasket (Bottom).  Thanks John !
Looks very similiar to vw beetle fender welting.  Thanks Mike !


Total width   22/32 in.

Distance from edge of bulge to end 14/32 in.

Diameter of bulge  1/4 in.

Thickness of base material  1/16 in.

CVX16 = 82 in. long
CVX18 / CVX20's = 88 in. long
« Last Edit: November 20, 2019, 06:56:58 PM by Hyperacme »
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 11822
Re: Glastron/Carlson windshields ...
« Reply #9 on: May 31, 2019, 03:57:26 PM »
BOAT TAYLOR WINDSHIELD HOLD DOWN HARDWARE~STARCRAFT~FEATHERCRAFT~GLASTRON~MARINE
horsehead_traders eBay store …
https://www.ebay.com/sch/horsehead_traders/m.html?item=361073454913&rt=nc&_trksid=p2047675.l2562


SET OF 4 HIDDEN HOLD DOWN FASTENERS FOR OLDER TAYLOR PLEXIGLASS WRAP-AROUND BOAT WINDSHIELDS.  Set includes 4 OF EACH: threaded paddle fastener, rubber grommet, acorn nut, and lock nut. Works great with our pre-cut 110" Taylor style white rubber window gasket found in our other ebay listings or by contacting us.
« Last Edit: September 22, 2019, 10:15:17 PM by Hyperacme »
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 11822
Re: Glastron/Carlson windshields ...
« Reply #10 on: March 03, 2020, 07:12:19 PM »
From Mark .. On CVX gasket mounting ..

Removed the old foam seal and used two-sided clear tape to hold new gasket in place during install. Worked pretty good and real happy with the end result, except I recommend you make ends long enough to go under both bracket screws. Stretch it slightly before you screw it down so it doesn’t sag or get loose in corners.
« Last Edit: March 03, 2020, 07:14:55 PM by Hyperacme »
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 11822
Re: Glastron/Carlson windshields ...
« Reply #11 on: May 10, 2020, 02:21:42 PM »
This was hidden in other WS info .. If anyone find size that works with there WS .. please post part number.
There are more style on the link, picture are just a few styles.

Taylor made .. Glazing Assembly Vinyls
https://www.taylormadeproducts.com/hardware/glazing-assembly-vinyls/
Gregg
'76 CV16