Author Topic: Brand New Member...... I just bought a CVZ 19 Bowrider project boat  (Read 9981 times)

0 Members and 1 Guest are viewing this topic.

Offline Jason

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 5491
  • 1974 CV16SS, 1986 CV23
Re: Brand New Member...... I just bought a CVZ 19 Bowrider project boat
« Reply #20 on: May 26, 2014, 01:14:04 PM »
You probably just need to sand more. Maybe some of the oxidation when deeper in certain spots more than others.
Jason S.
1974 Glastron Carlson CV16SS 140 I/O
1986 Glastron Carlson CV23 260 I/O

Offline chipbeal

  • Donate members
  • Jr. Member
  • *****
  • Posts: 32
Re: Brand New Member...... I just bought a CVZ 19 Bowrider project boat
« Reply #21 on: May 29, 2014, 09:14:53 AM »
Thanks for the reply..... Blotches were there before, during, and after wet sanding.  They are in the gel coat or perhaps a previous clear-coating. I am very perplexed.  They just won't come out.  I have even gone down to 400, then 600, then 800 and then 100 wet-sanding and they never go away.  Very frustrating.
Chip
Glastron Carlson CVZ 19 Mercury Black Max 175
Baja 16 ss Mercury Black Max 150 - 60 mph

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 12285
Re: Brand New Member...... I just bought a CVZ 19 Bowrider project boat
« Reply #22 on: May 29, 2014, 09:28:18 AM »
Post problem/pictures on the national site (  http://www.classicglastron.com/phpbb/index.php  )  to see if any one has an idea of what they are ...
Do you think it has been clear coated ?
Gregg
'76 CV16

Offline dorelse

  • Administrator
  • Hero Member
  • *****
  • Posts: 5937
Re: Brand New Member...... I just bought a CVZ 19 Bowrider project boat
« Reply #23 on: May 29, 2014, 10:20:26 AM »
Do you think it has been clear coated ?

I was also wondering if it had been poli-glow'd or something too...
1990 Sierra 1700

Offline V153

  • Hero Member
  • *****
  • Posts: 4956
Re: Brand New Member...... I just bought a CVZ 19 Bowrider project boat
« Reply #24 on: May 29, 2014, 02:54:54 PM »
Ya. That'd be a fair guess.
'81 C500_given away, bought back_75.1 mph
'81 Baja 15SS_140 Frankenrude_66.7 mph
'70 something SpeedCraft_(Allison 16R Clone)_69.0 mph
'79 CVZ19_given away
'71 V153_54.8 mph_wrecked


WALK TALL AND CARRY A BIG BILGE PUMP

Offline Diamond Chad

  • Administrator
  • Hero Member
  • *****
  • Posts: 480
Re: Brand New Member...... I just bought a CVZ 19 Bowrider project boat
« Reply #25 on: May 29, 2014, 04:03:19 PM »
What is Poly-Glow ?  I have a section on my 16 that has a sort of milky haze on the gelcoat that I cannot quit put my finger on.   Seems more like something was applied or coated over it.   Its not plain sun fade or chalking, its not calcuim or hard water buildup, I dont know what it is.   I was going to go after it with compound first.    It clears up when hit with acid wash, but then back to milky when drys.
88 CVX-16 115 Merc
57 Dunphy Imperial Musky - 57 Golden Javelin
01 Malibu Sunsetter 21 LSV 340 EFI

Offline V153

  • Hero Member
  • *****
  • Posts: 4956
Re: Brand New Member...... I just bought a CVZ 19 Bowrider project boat
« Reply #26 on: May 29, 2014, 04:53:26 PM »
What is Poly-Glow ?
I have a theory it's acrylic floor polish but that's just my guess. Google it. It's a sponge/wipe on finish for faded fiberglass. Overall the reviews are purty good IF you prep the surface properly. If'n ya don't it'll magnify areas where you didn't.
'81 C500_given away, bought back_75.1 mph
'81 Baja 15SS_140 Frankenrude_66.7 mph
'70 something SpeedCraft_(Allison 16R Clone)_69.0 mph
'79 CVZ19_given away
'71 V153_54.8 mph_wrecked


WALK TALL AND CARRY A BIG BILGE PUMP

Offline Diamond Chad

  • Administrator
  • Hero Member
  • *****
  • Posts: 480
Re: Brand New Member...... I just bought a CVZ 19 Bowrider project boat
« Reply #27 on: May 29, 2014, 05:23:26 PM »
Yea that sounds about right.   Its hard but seems softer than gelcoat.  Ill know more when I hit it with the compound and polisher.  thank you.
88 CVX-16 115 Merc
57 Dunphy Imperial Musky - 57 Golden Javelin
01 Malibu Sunsetter 21 LSV 340 EFI

Offline Diamond Chad

  • Administrator
  • Hero Member
  • *****
  • Posts: 480
Re: Brand New Member...... I just bought a CVZ 19 Bowrider project boat
« Reply #28 on: May 29, 2014, 08:18:26 PM »
seems right, it was some kind of acrylic Mop and Glow.  Machine polisher and compound took it off with some work, whats under looks much better.  Just need to hit with fine polish and wax and back to normal.
88 CVX-16 115 Merc
57 Dunphy Imperial Musky - 57 Golden Javelin
01 Malibu Sunsetter 21 LSV 340 EFI

Offline chipbeal

  • Donate members
  • Jr. Member
  • *****
  • Posts: 32
Re: Brand New Member...... I just bought a CVZ 19 Bowrider project boat
« Reply #29 on: April 10, 2015, 07:32:42 AM »
Hi everyone!
I haven't posted since last summer.  I found the cure for my blotched deck.  First of all, the problem was a bad previous clear coat sitting in the Texas sun.  I had to use a fairly strong paint and varnish remover to get it off.  I had to be very careful but it is working.  I am about 1/3 done.  I can't wait for real spring in northern Wisconsin to start again since I don't have a large enough garage.
Chip
Glastron Carlson CVZ 19 Mercury Black Max 175
Baja 16 ss Mercury Black Max 150 - 60 mph

Offline chipbeal

  • Donate members
  • Jr. Member
  • *****
  • Posts: 32
Re: Brand New Member...... I just bought a CVZ 19 Bowrider project boat
« Reply #30 on: September 15, 2016, 07:59:57 AM »
It's been over a year since I posted on my project boat. I found out the splotching on my boat was a really bad clearcoat. I was told by a local boat repair shop that there was no hope. I would have to get a whole new paint job. So, I decided to experiment. I got a little bit of stripper and put it on a bad spot, watched it, I then took the stripper and clearcoat off, and it seemed to work. I've been in the process of stripping my entire finish down to the metalflake. It's not perfect but it's  ton better. After I get it totally stripped I will then sand it and wax it. I hope that will work. The boat promises to be  beautiful. After I get the finish done, I will then start on the upholstery. Will send pictures along the way.
Chip
Glastron Carlson CVZ 19 Mercury Black Max 175
Baja 16 ss Mercury Black Max 150 - 60 mph

Offline chipbeal

  • Donate members
  • Jr. Member
  • *****
  • Posts: 32
Re: Brand New Member...... I just bought a CVZ 19 Bowrider project boat
« Reply #31 on: September 15, 2016, 08:31:21 AM »
Also, I want to restore interior to showroom original. I know I've seen pics of a CVZ interior restoration. Does anyone have those pics. I remember it was a fabulous restoration. I want to do the same.
Chip
Glastron Carlson CVZ 19 Mercury Black Max 175
Baja 16 ss Mercury Black Max 150 - 60 mph

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 12285
Re: Brand New Member...... I just bought a CVZ 19 Bowrider project boat
« Reply #32 on: September 15, 2016, 09:55:30 AM »
Seats ...
http://forum.cgoamn.com/index.php?topic=3820.0

CVZ18 & CVZ19 seat pictures ...
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 12285
Re: Brand New Member...... I just bought a CVZ 19 Bowrider project boat
« Reply #33 on: September 15, 2016, 09:56:36 AM »
CVZ18 & CVZ19
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 12285
Re: Brand New Member...... I just bought a CVZ 19 Bowrider project boat
« Reply #34 on: September 15, 2016, 09:57:04 AM »
CVZ
Gregg
'76 CV16

Offline dorelse

  • Administrator
  • Hero Member
  • *****
  • Posts: 5937
Re: Brand New Member...... I just bought a CVZ 19 Bowrider project boat
« Reply #35 on: September 15, 2016, 10:25:29 AM »
Also, I want to restore interior to showroom original. I know I've seen pics of a CVZ interior restoration. Does anyone have those pics. I remember it was a fabulous restoration. I want to do the same.

Chip - are you talking about the recent Green/White one?
1990 Sierra 1700

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 12285
Gregg
'76 CV16

Offline chipbeal

  • Donate members
  • Jr. Member
  • *****
  • Posts: 32
Re: Brand New Member...... I just bought a CVZ 19 Bowrider project boat
« Reply #37 on: September 17, 2016, 07:09:13 AM »
These are all very helpful. I can show these to the upholstery people. Thank you very much.
Chip
Glastron Carlson CVZ 19 Mercury Black Max 175
Baja 16 ss Mercury Black Max 150 - 60 mph

Offline nes-cv23

  • Hero Member
  • *****
  • Posts: 787
Re: Brand New Member...... I just bought a CVZ 19 Bowrider project boat
« Reply #38 on: September 17, 2016, 07:49:08 AM »
If your only wet sanding down to 1000, you need to keep going. I sand mine down to 2500 in 500 changes ... 1000-1500-2000-2500. You can get it to shine like glass if you go that far..
Past to present: 84 ssv-151, 76 cvx-16 ss, 77cvx-20 jet, 90 CSS-19, 77 gt-150, 2-78 cvx-16, 79cvx-16, 79 cvz-18, 78 cv-23, 73 cv-16, 74 cv-18, 89 219 Futura, 76 gt-150 jet, 79 cv-23, 02 Gx-225,  1980 intimidator = done!

Offline chipbeal

  • Donate members
  • Jr. Member
  • *****
  • Posts: 32
Re: Brand New Member...... I just bought a CVZ 19 Bowrider project boat
« Reply #39 on: November 30, 2018, 01:20:02 PM »
Hey everyone!  I have again jumped into my restoration project.  I began a new post today about where I am at.  Check it out and thank you all for posting on this discussion post.  Chip
Chip
Glastron Carlson CVZ 19 Mercury Black Max 175
Baja 16 ss Mercury Black Max 150 - 60 mph