Author Topic: GT160 Seats  (Read 2037 times)

0 Members and 1 Guest are viewing this topic.

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 12160
GT160 Seats
« on: February 10, 2017, 02:09:28 PM »
GT160 ...
Thanks Terry & Panamajack ...

Rear ...








Front ...

The actual bottom is 14 wide by 9.5 deep.  The mounting holes are 11.75 wide by 7.5 deep  plus or minus a few hundredths









RocketBobs seats ...







« Last Edit: June 30, 2017, 04:47:52 PM by Hyperacme »
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 12160
Re: GT160 Seats
« Reply #1 on: January 25, 2020, 06:14:32 PM »
Gregg
'76 CV16

Offline Gordon02

  • Jr. Member
  • **
  • Posts: 43
    • RRR Tool Solutions
Re: GT160 Seats
« Reply #2 on: January 26, 2020, 06:09:19 AM »
Hi Gregg,

I'd like to see how these seats are supported and attached to the boat's hull. Specifically, how the box is constructed and attached to the floor. Since these don't attach to the sides of the cap up at the gunnel like the 150 does, how did Glastron support and deal with side-to-side forces (lateral)? 

I've looked around in General and Vendor Resources for a "Build Sheet" on the GT160 and the CV16 like that one posted on the GT150 and did not find one. As always, this site Rocks! Gordon

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 12160
Re: GT160 Seats
« Reply #3 on: January 26, 2020, 09:36:41 AM »
I don't have any pictures of GT160 seat bases. But have some of the CV16's with the GT seats.
They have boxes like the CVX seats, which are just glassed to floor.

We don't have build sheets for other boats.
There are G/C parts catalogs ..
http://forum.cgoamn.com/index.php?topic=2917.0

Gregg
'76 CV16

Offline Gordon02

  • Jr. Member
  • **
  • Posts: 43
    • RRR Tool Solutions
Re: GT160 Seats
« Reply #4 on: January 26, 2020, 09:55:41 PM »
Gregg, thanks  -these show me what I needed to see. They are laminated into the hull.

Gordon

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 12160
Re: GT160 Seats
« Reply #5 on: January 27, 2020, 10:04:58 AM »
This guy put bucket seats in his GT150.
Seat pictures start on page #6 of thread.
http://www.classicglastron.com/phpbb/viewtopic.php?f=28&t=8880

Look thru here for more GT rehabs.
Most are missing picture.
http://www.classicglastron.com/phpbb/viewforum.php?f=28

CVX18 and CVX20 have swivel & sliding aluminum bases that might not fit.
Search "Boat seat bases" on Google.
Picture isn't a CVX base .. But gives you the idea.
If room you could add swivel platform. Second picture.
Gregg
'76 CV16