Author Topic: 25" Cleaver prop question  (Read 495 times)

0 Members and 1 Guest are viewing this topic.

Offline Carlson_from_Germany

  • Sr. Member
  • ****
  • Posts: 371
25" Cleaver prop question
« on: January 03, 2018, 04:08:23 AM »
Guys, I have a question. Has anyone of you seen a 25" Cleaver with a FloTorq hub?
I'm having trouble finding the right prop for the Intimidator now that I run a different outdrive.

Offline David CVX-16

  • Contributing Member 2015
  • Hero Member
  • *
  • Posts: 3451
Re: 25" Cleaver prop question
« Reply #1 on: January 03, 2018, 08:32:57 AM »
I would start by searching the Scream and Fly Buy and Sell Marketplace Propellers. Good place to get performance props.

You can use search words within the section.

You may also post for a propeller wanted in the prop section.

http://www.screamandfly.com/forumdisplay.php?5-Propellers

http://www.2040-parts.com/mercury-25-pitch-3-blade-cleaver-48-89806-25-i1561947/
« Last Edit: January 03, 2018, 05:28:40 PM by David CVX-16 »
David
87' CVX-16, 85' 115 HP Johnson, 58.8 MPH GPS w/ 23" SRX Prop
88' 115 HP Mercury (Backup Motor)

Offline fireman24mn

  • Hero Member
  • *****
  • Posts: 1905
Re: 25" Cleaver prop question
« Reply #2 on: January 03, 2018, 09:23:52 AM »
Guys, I have a question. Has anyone of you seen a 25" Cleaver with a FloTorq hub?
I'm having trouble finding the right prop for the Intimidator now that I run a different outdrive.

Do you mean 25 Pitch and not inch I don't think a 25in prop will fit.

I ran a 4 blade 25 P Merc Rev 4 and tried a 25 pitch Hydromotive on my 23 both were flo Torq hubs.  I also have a 28 P Bravo1 4 blade I am going to try this spring. I bought it off a guy on FB Marketplace.
I think this has become an addiction.


1977 CV-23 I/O Being restored
1976 CV-23 Jet
1985 Pearson MotorYacht 43ft

Offline Carlson_from_Germany

  • Sr. Member
  • ****
  • Posts: 371
Re: 25" Cleaver prop question
« Reply #3 on: January 03, 2018, 10:53:22 AM »
Thanks David, I haven't checked SAF in quite a while.

Sorry Shawn, yes I meant pitch. Here in Europe they use " as pitch.
Hydromotives are nearly impossible to find over here. And shipping a heavy prop is probably not cheap.
So far the cleaver just performed best.

Offline fireman24mn

  • Hero Member
  • *****
  • Posts: 1905
Re: 25" Cleaver prop question
« Reply #4 on: January 04, 2018, 09:30:13 AM »
The Merc Rev 4 I tried was almost the same MPH and RPM as the cleaver style Hydromotive. They are a surfacing prop as well from my understanding. There is a Rev 4 25P on CL in my area not sure how much it would be to ship it to ya. Tim just told me about it last night
I think this has become an addiction.


1977 CV-23 I/O Being restored
1976 CV-23 Jet
1985 Pearson MotorYacht 43ft

Offline Carlson_from_Germany

  • Sr. Member
  • ****
  • Posts: 371
Re: 25" Cleaver prop question
« Reply #5 on: January 04, 2018, 10:14:19 AM »
I have a 25 Rev 4 but it's with a solid hub. So that won't work. Shipping would probably cost more than the actual prop die to the weight.