Author Topic: Glastron / Carlson Steering Wheels  (Read 1406 times)

0 Members and 1 Guest are viewing this topic.

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 11408
Re: Glastron / Carlson Steering Wheels
« Reply #20 on: March 24, 2019, 06:06:14 PM »
1987
The one's pictured have the 1985 / 1986 wheels.
Dave's CVX16 and a lot of the 1987 Glastron's have the black rim, oblong spoke cut outs and a different style center cap.
Two (Red & Blue) 1987 CV23's have this emblem in center cap.

« Last Edit: March 26, 2019, 04:54:03 PM by Hyperacme »
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 11408
Re: Glastron / Carlson Steering Wheels
« Reply #21 on: March 24, 2019, 07:03:07 PM »
1988
Same as 1985 / 1986 / 1987 wheels.

« Last Edit: March 24, 2019, 07:47:38 PM by Hyperacme »
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 11408
Re: Glastron / Carlson Steering Wheels
« Reply #22 on: March 24, 2019, 07:12:30 PM »
1989
Same as 1985 /1986 / 1987 / 1988.
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 11408
Re: Glastron / Carlson Steering Wheels
« Reply #23 on: March 24, 2019, 07:15:56 PM »
1990
Same as 1985 /1986 / 1987 / 1988 / 1989.
« Last Edit: March 24, 2019, 07:46:50 PM by Hyperacme »
Gregg
'76 CV16

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 11408
Re: Glastron / Carlson Steering Wheels
« Reply #24 on: March 24, 2019, 07:20:33 PM »
1992
Went to this style ...
Gregg
'76 CV16

Offline Terry_Curran

  • Donate members 2018
  • Hero Member
  • *****
  • Posts: 549
Re: Glastron / Carlson Steering Wheels
« Reply #25 on: March 25, 2019, 11:55:50 AM »
Hereís one of my Ď86 SSV-191

EDIT ..
1986 SSV191 from brochure
« Last Edit: March 25, 2019, 02:02:02 PM by Hyperacme »

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 11408
Re: Glastron / Carlson Steering Wheels
« Reply #26 on: June 06, 2019, 09:56:45 PM »
A old square shaft wheel can be converted to a keyed/taper shaft wheel.
Some options .. Thanks Ray !

 Thereís a few options: you could just use a different wheel entirely. Detmar made the later style wheels and made several hub styles, but they all relied on a 3 screw system to hold the spikes to the hub. Some hubs had interchangeable adapters. A little use of some plate and you can modify your old wheel to use the new style adapter. Lots of possibilities.

The adapter you posted (first picture) above is what I would do if I didnít have all these parts. Iíd place that inside of the old plastic hub, drill and tap where needed, and the only other mod you would have to do is make the G center cap removable. Adhesive backed strong magnets would be perfect.
Gregg
'76 CV16

Offline cv-19

  • Full Member
  • ***
  • Posts: 139
Re: Glastron / Carlson Steering Wheels
« Reply #27 on: July 26, 2019, 11:32:41 AM »

 Ride Guide rack cable installation info.

Offline cv-19

  • Full Member
  • ***
  • Posts: 139
Re: Glastron / Carlson Steering Wheels
« Reply #28 on: July 30, 2019, 09:23:19 AM »
 
  CV-19 original ride guide steering cable length. 17ft. 6 in.
  Cables are marked  close to cable end. Can use 18 ft. cable,
 but will have to loop it at the engine end.