Author Topic: Couldn't Resist (Read 15509 times)

V153 · « **on:** August 04, 2016, 03:13:33 PM »

Future project:

75starflight · « **Reply #1 on:** August 04, 2016, 03:33:50 PM »

A CVZ-19, nice find Doug! Should Fly when done right!

dorelse · « **Reply #2 on:** August 04, 2016, 03:38:02 PM »

Nice! No pad, but I had mine up to 60 mph.

thedeuceman · « **Reply #3 on:** August 04, 2016, 03:40:13 PM »

Vary nice

Sent from my iPhone using Tapatalk

thedeuceman · « **Reply #4 on:** August 04, 2016, 03:42:33 PM »

The plants and the flat tires suggest you probably got a good deal on it

Sent from my iPhone using Tapatalk

V153 · « **Reply #5 on:** August 04, 2016, 03:49:39 PM »

Don't get much better deals than free. Guy's posed to drop off the title & trailer reg tomorrow. Which means I won't sleep well tonight ...

Ya Joe she needs some weed wackin and a good bath. Rough but purty much all there. "Motor ran great last time out" ...

Plugcheck · « **Reply #6 on:** August 04, 2016, 04:08:17 PM »

I will know better than to sit up front when offered. Paybacks can be a B****. Nice score, same rude as my brothers Ranger. A bit of a gem in the rough, seems a few convertibles floating around the club now.

V153 · « **Reply #7 on:** August 04, 2016, 04:32:40 PM »

Quote from: Plugcheck on August 04, 2016, 04:08:17 PM

I will know better than to sit up front when offered. Paybacks can be a B****.

Nah, I'd never hold a grudge over something like that ...

Probly get a chance to take a closer look at her tomorrow afternoon.

dorelse · « **Reply #8 on:** August 04, 2016, 04:40:00 PM »

Loved mine, but that transom is impossible to get at without splitting the hull.

V153 · « **Reply #9 on:** August 04, 2016, 04:52:56 PM »

Quote from: dorelse on August 04, 2016, 04:40:00 PM

Loved mine, but that transom is impossible to get at without splitting the hull.

Looks like it might not be so bad with the OB? I'll have more news/pics tomorrow.

Does anybody in the club have an OB model?

rheine · « **Reply #10 on:** August 04, 2016, 06:42:37 PM »

That'll take up a whole winter for sure. Looks like it needs everything down to the hull. The right price.

*R

Glastronjohn18 · « **Reply #11 on:** August 04, 2016, 09:41:16 PM »

Nice score Doug. It looks complete, no parts missing. You might be lucky and all it'll need are new stringers.

Hyperacme · « **Reply #12 on:** August 05, 2016, 09:15:43 AM »

After reading the vague Craigslist post, I thought it would be a Glastron Tri-Hull in a basket ...
Good score Doug !

Rosscoe · « **Reply #13 on:** August 05, 2016, 09:17:23 AM »

Great Doug. I see its parked at your shop...with flat tires?

V153 · « **Reply #14 on:** August 05, 2016, 02:57:48 PM »

Quote from: Rosscoe on August 05, 2016, 09:17:23 AM

Great Doug. I see its parked at your shop...with flat tires?

Ya, we flat bedded her in. Gotta get it jacked up'n see if they'll hold air.

Got a lil work done between thunder storms: Bad news is the "great running" motor is locked up. Gonna pull the plugs tomorrow and dump some mystery oil down the holes, and pray. Good news is it appears unmolested, so we'll see.

Guy dropped the title off this AM so that's cool.

V153 · « **Reply #15 on:** August 05, 2016, 03:02:49 PM »

Quote from: Glastronjohn18 on August 04, 2016, 09:41:16 PM

Nice score Doug. It looks complete, no parts missing. You might be lucky and all it'll need are new stringers.

Yeah it's purty much all there. Dug out the front seats from under all the crap. Be good for patterns at least. Rear bench is AWOL. Doubt the fuel tank is original. Believe these had 27 gal tanks?

75starflight · « **Reply #16 on:** August 05, 2016, 04:38:43 PM »

Doug, I have an original bench from my CVZ-18 I need to make some patterns from sometime. If you want a set of patterns let me know. be happy to mail you a set when I get them made.

Oh, I have a set of patterns for the original bucket seats plus original cushions from the bow seats also if you would like patterns.

V153 · « **Reply #17 on:** August 05, 2016, 05:29:58 PM »

Quote from: 75starflight on August 05, 2016, 04:38:43 PM

Doug, I have an original bench from my CVZ-18 I need to make some patterns from sometime. If you want a set of patterns let me know. be happy to mail you a set when I get them made.

Oh, I have a set of patterns for the original bucket seats plus original cushions from the bow seats also if you would like patterns.

Thanks Brandon. Think I got enough to work from on the fwd stuff, but the bench would be nice. 'Preciate it.

No rush. This thing's second in line.

V153 · « **Reply #18 on:** August 05, 2016, 07:10:36 PM »

Quote from: Rosscoe on August 05, 2016, 09:17:23 AM

I see its parked at your shop...with flat tires?

Yes. My director of advertising suggested we start a campaign appealing to a wider spectrum of demographics.

dorelse · « **Reply #19 on:** August 05, 2016, 08:34:42 PM »

Quote from: V153 on August 05, 2016, 03:02:49 PM

Quote from: Glastronjohn18 on August 04, 2016, 09:41:16 PM
Nice score Doug. It looks complete, no parts missing. You might be lucky and all it'll need are new stringers.
Yeah it's purty much all there. Dug out the front seats from under all the crap. Be good for patterns at least. Rear bench is AWOL. Doubt the fuel tank is original. Believe these had 27 gal tanks?

I couldn't tell you Doug...mine had 2 poly tanks with a valve to switch between them.