It's been over a year since I posted on my project boat. I found out the splotching on my boat was a really bad clearcoat. I was told by a local boat repair shop that there was no hope. I would have to get a whole new paint job. So, I decided to experiment. I got a little bit of stripper and put it on a bad spot, watched it, I then took the stripper and clearcoat off, and it seemed to work. I've been in the process of stripping my entire finish down to the metalflake. It's not perfect but it's ton better. After I get it totally stripped I will then sand it and wax it. I hope that will work. The boat promises to be beautiful. After I get the finish done, I will then start on the upholstery. Will send pictures along the way.