Minnesota Classic Glastron Forum

General Category => General Discussion => Topic started by: Waterwolf on June 12, 2021, 11:14:27 AM

Title: Pics of the Transom and it's issues.
Post by: Waterwolf on June 12, 2021, 11:14:27 AM

So the transom has big issue as you will see. Coosa board looks like it is in the near future of repair. My question how much to cut for  repair. Do I need to make a template of the back end? I have watched several videos but none that cover the CV-16 replacement. Also it looks from one pic that the boat was originally red. I like the purple but want metal flake in it. Gonna leave it for the pros.

Any suggestions are greatly appreciated.
Claire

Title: Re: Pics of the Transom and it's issues.
Post by: Plugcheck on June 12, 2021, 11:38:26 AM

Seacast could be an option, several threads on the site where it was used without splitting the hull.    Doug Campbell has used it with success.

Title: Re: Pics of the Transom and it's issues.
Post by: Hyperacme on June 12, 2021, 05:52:58 PM

Doug & Ron used a poured transom, but had to make a mold of transom first.

Ron's CVX16 project ..
http://forum.cgoamn.com/index.php?topic=6488.msg94136#msg94136

C500 Spy Pics ..
http://forum.cgoamn.com/index.php?topic=7551.0

Jeff used composite board on his GT150.

Let the fun begin ..
http://forum.cgoamn.com/index.php?topic=8054.0

We split my hull / deck and used cardboard to make templet.
Others have used pink insulation board as templet material.

CV glassin & grindin' ...
http://forum.cgoamn.com/index.php?topic=4062.40