Minnesota Classic Glastron Forum

General Category => Members Profiles / Introductions => Topic started by: stovepipe699 on April 29, 2020, 09:47:28 PM

Title: CV16 from Manitoba
Post by: stovepipe699 on April 29, 2020, 09:47:28 PM
Hello from Manitoba, new to Glastron boats, my son and I picked up a 1972 CV16 that needs a complete restoration.  I was sent here by a helpful member of a Glastron Facebook group after getting help ID’ing the model of my boat.  I’m here to learn how to redo our rotten sunfaded boat.
Title: Re: CV16 from Manitoba
Post by: Plugcheck on April 29, 2020, 10:29:54 PM
It would take considerable time to describe the entire process to restore a Glastron here.  The good news is the 16 is a good father/son project.   Here is what I would suggest, 1st would be to look over the multiple threads on this site related to restorations.  Everything is there from tear down to final finishing.   The best advice I could offer is to plan the restoration, time, and costs before starting.   Is there a useable motor for the project?  Armed with the knowledge of how to attack it, the materials on hand, and some help can go a long ways towards completion.   I've never seen quite that paint scheme before, maybe Gregg knows if that was a factory scheme?  Good luck, and be sure to post a thread on your project with pictures.
Title: Re: CV16 from Manitoba
Post by: Hyperacme on April 29, 2020, 10:37:06 PM
Welcome to the forum Rob !
There are three CV16SS rebuilds going on now, little different then yours but same basic design.

Also "Search" CVX16 rebuilds in forum. Doug and Ron rebuilt there CVX & C500 to hold 150 HP & 200 HP motors.

1976 CV 16 V8 Complete Rebuild ..
http://forum.cgoamn.com/index.php?topic=8016.0

CV16 V8 restoration ..
http://forum.cgoamn.com/index.php?topic=8488.0

Project Carla: 74' CV-16SS Restoration..
http://forum.cgoamn.com/index.php?topic=8526.0

 
My "72" CV16 Restoration ..
http://forum.cgoamn.com/index.php?topic=8002.0

Splash Day in 7 ..
http://forum.cgoamn.com/index.php?topic=5298.0

CV glassin & grindin' …
http://forum.cgoamn.com/index.php?topic=4062.0

CV16 history ..
http://forum.cgoamn.com/index.php?topic=6918.0

CV Seats / Dash / Console / etc.
http://forum.cgoamn.com/index.php?topic=7005.0

American Runabouts / Aaron's reproduction parts ..
http://forum.cgoamn.com/index.php?topic=7978.0
Title: Re: CV16 from Manitoba
Post by: Hyperacme on April 29, 2020, 10:39:30 PM
Mike .. I think someone added pin stripping / decals around the swoosh.
Title: Re: CV16 from Manitoba
Post by: Plugcheck on April 30, 2020, 02:26:00 PM
Thanks for the clarification Gregg, either way I kinda like it.
Title: Re: CV16 from Manitoba
Post by: Hyperacme on April 30, 2020, 03:02:58 PM
Good info ..

Glastron Carlson CV-23 Rebuild Top to Bottom
http://forum.cgoamn.com/index.php?topic=3740.0