Minnesota Classic Glastron Forum
General Category => General Discussion => Topic started by: wpstarling on March 26, 2021, 10:28:33 AM
-
What does everyone use when painting the bottom of the boat? Found a bunch of posts where people painted but didn't see a list of the recommendations. Boat is only in water when we're using it, otherwise it's on the trailer with carpeted bunks.
Thanks,
Bill
-
Bottom paint is only needed on boats that sit in water all summer.
There would be no need if you remove boat every night or it just sits in water for a day or two.
It has stuff in it to keep algae and other stuff from building up on your hull.
Why do boats require bottom paint? (scroll down) ...
https://www.westmarine.com/bottom-paint
-
I should clarify, the bottom of the boat had areas that needed to be sanded/repaired so now I need paint. I got Interlux VC performance epoxy, it is NOT antifouling but is supposed to be hard and relatively easy to spray. I'm going to try to spray it this weekend so i'll try to grab pics of before and after of it. Only downside is if you want a color other than white since it comes only in white.
-
I used that product on my Timi project over interprotect 2000 due to issues with osmotic blisters. The epoxy finish will work well, and it can be rolled, tipped, or sprayed with excellent results. Wear good ppe, a good respirator is mandatory. If you want it smooth, prepare to wet sand the next day while it's still a bit soft.
-
I used that product on my Timi project over interprotect 2000 due to issues with osmotic blisters. The epoxy finish will work well, and it can be rolled, tipped, or sprayed with excellent results. Wear good ppe, a good respirator is mandatory. If you want it smooth, prepare to wet sand the next day while it's still a bit soft.
Good to know. I've got a full suit and a face mask with fresh air supply :) so i should be good. I'm prepping the few spots right now that looked like the boat dinged something. Should be able to do it this weekend.