Minnesota Classic Glastron Forum

General Category => Classified / Wanted to Buy => Topic started by: rayar3 on June 23, 2013, 09:11:32 PM

Title: Aluminum Grab Handle
Post by: rayar3 on June 23, 2013, 09:11:32 PM
For a CVZ-18. Cheap! If you need it PM me, I don't need it. I can also weld up the letters if you want it to be plain like on the 1987+ grab handles. Brushed finish with black lettering.
Title: Re: Aluminum Grab Handle
Post by: 75starflight on June 23, 2013, 09:31:32 PM
PM you I will take it.!
Title: Re: Aluminum Grab Handle
Post by: rayar3 on June 23, 2013, 10:30:34 PM
You have a PM!

(http://www.classicglastron.com/phpbb/download/file.php?id=16123&t=1)
Title: Re: Aluminum Grab Handle
Post by: 75starflight on June 23, 2013, 10:39:09 PM
Got it replied.
Title: Re: Aluminum Grab Handle
Post by: rayar3 on June 23, 2013, 11:00:11 PM
SOLD! Thanks Brandon! You should see it mid week.
Title: Re: Aluminum Grab Handle
Post by: 75starflight on June 23, 2013, 11:07:58 PM
No thank you, it will look great on the cvz when she is restored.
Title: Re: Aluminum Grab Handle
Post by: Burnin Daylight on June 24, 2013, 08:29:44 AM
Does anyone know where to come across a grab handle for a CVX20?  A new member on the Oklahoma Boating Forum is looking for one.
Title: Re: Aluminum Grab Handle
Post by: 75starflight on June 24, 2013, 09:55:55 AM
Quote from: Burnin Daylight on June 24, 2013, 08:29:44 AM
Does anyone know where to come across a grab handle for a CVX20?  A new member on the Oklahoma Boating Forum is looking for one.

Barb, I have a couple blank ones I was planing on CNCing that will be up for sale as soon as i get the one from rayar. mabey we could set something up with rayar to have the logo CNCd in it.
Title: Re: Aluminum Grab Handle
Post by: rayar3 on June 25, 2013, 04:56:21 AM
The Bridgeport at the shop is a very basic machine and plotting the points are all manual inputs. I'll see how the CV-16 goes on my blank one but if it doesn't turn out well I'm just going to paint the CV-16 in the Glastron font and clear coat it so it doesn't chip. A good machine shop would be able to do it and compensate for the arch of the handle but it wouldn't be cheap. Cheaper to find a parts boat and buy the handle and a lot more common too.