Author Topic: New Member  (Read 247 times)

0 Members and 1 Guest are viewing this topic.

Offline Spudster

  • Newbie
  • *
  • Posts: 6
New Member
« on: March 24, 2021, 09:50:51 AM »
Hello, New to the forum. Looks like a good source for all types of information. After restoring a couple Hydrostreams, I have now gone over to the Glastron and picked up a CVX20 Jet for a project. I purchased the boat with all the wood already stripped out. Some patterns were saved etc. however it would be beneficial to look at one of these that is up and running to get an idea of floor height etc. Possibly someone in the Minneapolis area would allow me to take a look at their CVX 20, take a few pics etc. ?
This is my first jet, I have already had the engine rebuild and ready to move on to the boat.
Thanks, any info on this re-stringer project would be appreciated!
Pete

Online Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 12377
Re: New Member
« Reply #1 on: March 24, 2021, 11:41:48 AM »
Welcome to the forum Pete !

"cvxjet" ( http://forum.cgoamn.com/index.php?action=profile;u=3309 ) has some write ups and info on CVX20 jet rebuilds.
Most are on the "CGOA" forum ..  http://www.classicglastron.com/phpbb/index.php
His user name is the same there  ( cvxjet )
Gregg
'76 CV16