Author Topic: GCOTD  (Read 106057 times)

0 Members and 30 Guests are viewing this topic.

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 14222
Re: GCOTD
« Reply #600 on: July 21, 2025, 09:37:46 PM »
1979 Glastron CVX 18
CA$2,500
Listed a day ago in Vaudreuil-Dorion, QC

https://www.facebook.com/marketplace/item/699662142906748/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp%3A6c0cf2c1-8bae-45e2-b327-53d62282e250

Glastron CVX 18
V8 5.0l
Mechanical engineering in good working condition
The boat was used last summer
Boat needs some painting
Trailer in good condition Bearing light and new wire
The last 3 photos are before sandblasting
I have everything to pull it back up

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 14222
Re: GCOTD
« Reply #601 on: July 21, 2025, 09:45:17 PM »
1979 Carlson Glastron CVX16
CA$7,350
Listed a week ago in Ladysmith, BC

https://www.facebook.com/marketplace/item/614692781226115/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp%3Addd5d177-d05a-4f43-a73e-e30d78d9b82d

1979 Glastron Carlson 17ft + 150HP Johnson V6 2-stroke. Engine hours unknown, use mixed fuel 50:1. Blast through the water at over 90km/h.

Classic performance boat with a 1996 Johnson Fast Strike 150HP. Runs great, inspected by Dean?s Marine. Took me through all the Gulf Islands. Upgraded to a bigger fishing boat, so time to let her go. Engine flush after every use. Easy to pull with mid-sive SUV, fits in most garages. 

Minor issues: horn (manual horn included), USB doesn't charge, and tilt switch on motor (works fine on throttle to lower and lift engine).
Refurbished in 2023.
Fast, fun, and ready for the next adventure. Located in Saltair.

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 14222
Re: GCOTD
« Reply #602 on: July 21, 2025, 10:56:43 PM »
1990 16CSS for parts or restore

https://www.facebook.com/groups/179843005977786/posts/1807833049845432/?__cft__[0]=AZUZiUSx9BJRDgp8-XpCuNTYbKBlJWuTqhVsKFyx4wlL0oL2ou8mWWgHfee6mDXsjbLEnG5qxfkYCRXo-mUAZtkP3ShJHMN5-oXsVpuCAQv5XzpHso-s1hu_VBSLYEbdY0nnEWLUxy93WNAe9yf_E5Rt4DM58Q08MuEhR72ZQKxorh8bdATlq0uEtwaHTcJ51QI&__tn__=%2CO%2CP-R


1990 16CSS for parts or restore in lac da flambeau WI!
Side of the road. Guy said he would take 100!
It?s complete but needs full restore.
« Last Edit: July 24, 2025, 10:10:46 AM by Hyperacme »

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 14222
Re: GCOTD
« Reply #603 on: July 24, 2025, 10:10:17 AM »
1989 Glastron clarson 18css clarlson
$3,500
Listed 14 hours ago in Deatsville, AL

https://www.facebook.com/marketplace/item/714302884766551/?ref=marketplace_profile&referral_code=undefined

One of a kind won't fins another around here its a 18css clarlson 135 motor runs good and all just needs a impeller in foot and needs a good buff job has 1 small soft spot in floor new trailer tires and a nice stereo system call or text

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 14222
Re: GCOTD
« Reply #604 on: July 24, 2025, 01:35:12 PM »
1979 Glasstron CVX16
$3,500
Listed 6 days ago in Umatilla, FL

https://www.facebook.com/marketplace/item/636317818862193/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp%3Ad3dd0a6b-1301-4530-a470-14cee6541a39

MOTOR NEEDS WORK NEEEDS WIRING HARNESS,distributor, and starter (has spark and good compression on all cylinders can check your self) motor does crank
Was told it will take 500$ to fix and it ran 60mph with 2 people
all aluminum trailer rides great, needs light
have all paperwork for the boat and trailer , last regeneration was in 2022
has little soft spot where the driver rest his feet
all new back bench and still have both old front
Seats
Wiring harness is price $120
Distributor is price $250
Starter is price $40

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 14222
Re: GCOTD
« Reply #605 on: July 24, 2025, 02:14:59 PM »

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 14222
Re: GCOTD
« Reply #606 on: July 25, 2025, 10:35:35 AM »
1978 Glastron Carlson CV23
$3,500
Listed 3 hours ago in Clarksville, TN

https://www.facebook.com/marketplace/item/4056148687992486?ref=marketplace_profile&referral_code=undefined

1978 glastron Carlson cv23  with a 460 big block it is a jet drive boat  in verry good condition for its age the engine cranks over but is not getting spark it?s hasn?t been ran since last season I do not have time to mess with it. My loss is your gain asking $3500 call  or text 931-278/6058

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 14222
Re: GCOTD
« Reply #607 on: July 25, 2025, 07:05:03 PM »
1977 Glastron Carlson CVX 18
$1,500
Listed 8 hours ago in Rogers, AR

https://www.facebook.com/marketplace/item/2115996278896836?ref=marketplace_profile&referral_code=undefined

1977 Glasstron Carlson CVX 18 with a 235 OMC & matching trailer that's in great condition. Trailer has electric surge brakes. Boat is all original & runs good. Does need gas tank & out hull thru seal.

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 14222
Re: GCOTD
« Reply #608 on: July 25, 2025, 07:26:20 PM »

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 14222
Re: GCOTD
« Reply #609 on: July 25, 2025, 07:29:57 PM »
1973 Swinger Glastron V 186
$3,000
Listed 4 weeks ago in Seneca, MO

https://www.facebook.com/marketplace/item/1441782517009109

This is a one owner boat that was bought new in 1973.  Interior is in great condition.  Has been stored inside.  Flooring likely needs replaced.  It has been several years since the boat has been used but was running the last time it was in the water.

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 14222
Re: GCOTD
« Reply #610 on: July 25, 2025, 09:42:27 PM »
Glastron Carlson ski machine
$8500
located in Wisconsin

https://www.facebook.com/groups/917509491684655/posts/9693596944075822/?__cft__[0]=AZW9IyZFhWDnYF3Kz1C8fq_-Wjza0yoHZfMuyISIfdFYSwoXjDu-asFMRAhkX9T5FpUvRaGAkTt2MTsei9yCLnbtV4Vcuc1vkmThhtLw37S-OHw2JEntdP0Wdu8XiSN8t7KLSUsgbsBVZs6S2G7kmpGm&__tn__=%2CO%2CP-R

Just got done with my Glastron Carlson ski machine it's been a four year labor of love but now it's time to put it up for sale for 8,500and start on my next one located in Wisconsin

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 14222
Re: GCOTD
« Reply #611 on: July 27, 2025, 11:35:46 AM »
1976 CV16
$400
Located in Sevierville TN.

https://www.facebook.com/groups/classicglastron/posts/10164565656998594/?__cft__[0]=AZWF6XN29Mt5aJoHi8EHBQ_x4J8oiAFSQQXlDgL516j4zg8u9OK8GhmPfvZ3HKGNO9aEZGmsunvlHQEclveW2UGmmKi-EBO5LGx7YslJNeHArSWmtsEZ6wnvkRA-WXQqYjTa0T0yy8XKth-MpcD0Sg4p&__tn__=%2CO%2CP-R-R

Picked this glastron up awhile back. It's a little more of a project then I want to take on. Recently purchased another boat and this one is in the way. Really hoping I can find a home for it so I don't have to haul it off. It will need a complete restoration. Transom wood is gone. Floor is rotted down the center. The keel is fine until the last 3 inches at the back. It has a new rack and pinion steering cable that I ordered awhile back. I have a new bildge pump in the box and a new gas cap assembly as well. Tires and rims are new on the trailer. I pulled it 20 miles home with zero problems. Only asking $400 for the whole setup. I have the bill of sale from original owner and I will write one myself.
Located in Sevierville tn

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 14222
Re: GCOTD
« Reply #612 on: July 27, 2025, 01:14:28 PM »
1967 Glastron Jetflite Race Boat New Old Stock (NOS) Never in Water
Pekin, Illinois

https://www.ebay.com/itm/297496398545?fbclid=IwY2xjawLzSR5leHRuA2FlbQIxMABicmlkETFOZWR3cDQ1TmloM2NzSlB5AR5AVQlOoPbjN9yAxWQ8eilTDvEgUGaBllTjgIPuarWZE92-JEi95RYVA4icMw_aem_ZV-ZrXDzgTVbgcxivElv3g

Offered for the discriminating collector is a very rare New Old Stock Glastron Jetflite that has never been in the water, never had a motor on it and never had the steering system installed.  It comes with a Trailcar trailer that is original to the boat and still has the installation instructions in the original packaging. 

I am a long-time collector and purchased this boat several years ago after many years of searching for an original Jetflite.  The boat is a virtual time capsule with the original Dual Cable Ride Guide Steering Wheel in a box that has never been installed.  Please note there are no steering cables with the boat so the cables and potentially other mounting hardware will need to be acquired for installation. We have attached photos to show exactly what is included with the steering hardware.  The original interior is exactly the way it was equipped from the factory. 

This is a factory built race boat that has never been modified and has been garage kept since 1967. The recreational version of this boat had windshields, a double floor and other components for everyday use.  As detailed in the photos, the boat was built with only necessary hardware to keep weight to an absolute minimum.  This may be the only factory built Glastron Jetflite Race Boat remaining on planet earth and this one has never been in the water. 

The boat has a surface only burn mark on the port side, as evidenced in the photos.
Please feel free to ask any questions you have.
This boat has been the center piece of a vast collection of Boats and Motors acquired over 50+ years.  We had never planned to sell it however, health issues have recently impacted our priorities.  We will likely be listing other items from our collection on Ebay in future months.  Please see our feedback for evidence you are dealing with people you can trust.

Thanks for looking and happy bidding.
Pickup is in Pekin, IL 61554.
If buyer desires to have the boat shipped, we are willing to work with a shipper for pickup, as long as buyer makes all arrangements and pays for the boat and shipping ahead of time.   
Boat and original parts sold as-is.

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 14222
Re: GCOTD
« Reply #613 on: July 27, 2025, 05:02:26 PM »
1986 CVX 17
$5,000 
Listed in Manorville, NY

https://www.facebook.com/commerce/listing/1793069308234123/?media_id=0&ref=share_attachment

I have owned the boat for a long time. The boat was originally bought at a Glastron dealership in Island Park, New York. When I picked it up, it had a Johnson 90 hp V4 on the back of it. I had ran it for a few years like that, and then the motor went. Trying to keep the boat ero correct with that 90. It was all rigged for a 90 hp Johnson. Once the motor went, I decided to replace the floors and everything that it needed. I replaced the floors the sea boxes with marine ply. Used 1708 by axle fiberglass. The main stringer was in perfect shape. The transom was in perfect shape. The boat was never overpowered. We built the rear bench framing, and had it all new upholstery put on it and striped with different color vinyls. The left side and right side cooler apartments in the rear were also recovered and the wood was replaced. Replaced the front seats with matching upholstery and they also have lift posters. Replaced the fuel tank with an 18 gallon plastic tank under the deck, all new fuel lines from front to back and filters. Replaced to complete steering system. Replaced the steering with. A automatic safety rotary steering system. The system is literally a couple weeks old.  replaced the engine with a 2002 mercury 115 two-stroke. Just did a complete service to it spark plugs, wires, fuel filters, fuel hoses built the fuel pump, rebuilt, accelerator pump, water pump, and gear oil. The motor was always a lake George motor always freshwater. Is 140 psi all cylinders. Installed a brand new Apollo SS prop stainless steel . There is also a CMC manual jack plate with a 5 1/2 inch setback. Right now the motor height is set at 3 1/2 inches. The reason for selling the boat is that I need something that is bigger and better for my grandkids

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 14222
Re: GCOTD
« Reply #614 on: July 27, 2025, 05:32:09 PM »
Terry's Timmi  ...


1984 Glastron Carlson CVX-20 Intimidator
$15,000 
Listed in Indianapolis, IN

https://www.facebook.com/commerce/listing/1727055631257989/?media_id=1&ref=share_attachment

1984 Glastron Carlson CVX-20 Intimidator
Boats is water ready!
Read full description. 
Vortex roller block
Aligned bore checked-good
Balanced rotating assembly
New harmonic balancer
Block ?0? decked
Forged pistons
File fit rings
Crank polished
Crankshaft wiper
Cleveland bearings-standard size
Comp cams XM 270HR-12 roller cam and lifters
New sized push rods
Roller rocker arms
Brodix IK180 heads complete disassembled, springs checked for correct pressures and heights, metal shavings removed from head left from machining
New ARP crank, rod, head intake manifold bolts
New marine circulation pump, marine starter, marine alternator, plugs, cap, rotor, wires, marine flame thrower coil
EMI aluminum exhaust manifolds
Boat,
New stringers, transom and floor
New poly 26 gallon fuel tank
New wiring from the bow of the boat, to the stern, including 2 fuse blocks and clip on kill switch.
SEI outdrive purchased new in July of 2019, has 99 hours on it.
New gear oil and water pump.
Trailer
New springs, shackles and bolts
New wiring
Disc surge brakes with backup solenoid.
 I bought the boat in July of 2018 in NC. Rebuilt the structure over the next year, a friend, electrical engineer, redid the electrical at this time also.
Trailer work was done in spring of 2020 and the engine was rebuilt in 2021.
Since the wood structure was replaced, the boat has always been parked inside, other than our trips to Minnesota for the Glastron boat gathering for 6 days once a year.
I have a lot more pictures, just ask and I?ll try and send them
The boat still needs to be finished,  carpet, gelcoat, but needs nothing to enjoy it right now, and for years to come!
Full payment in cash only, local pickup. Cash in hand if you want to take it for a test ride. Serious buyers only please.

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 14222
Re: GCOTD
« Reply #615 on: July 27, 2025, 05:32:54 PM »
More pictures

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 14222
Re: GCOTD
« Reply #616 on: July 28, 2025, 03:47:12 PM »
1988 Glastron carlson cvx20
$2,500
Listed 23 hours ago in Tomahawk, WI

https://www.facebook.com/marketplace/item/1390777151987731/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp%3A376ffb21-b1ee-46e0-9092-7a6c4d4011d4

88' Glastron Carlson CVX20 with an Evinrude XP200 Outboard. Fresh cut n buff, detail, stain on wood and prop change. Currently struggling with getting spark. Installed and wired on a new CDI box on due to no spark, had intermittent spark and then loss. So I it narrowed down to stator or voltage regulator or trigger just haven't tested further. Too many projects going on currently. EZ Roller trailer in good shape with a nice spare and fresh grease on bearings. Floor had one soft in one spot but it's been treated and sealed. Front two captains chairs are in great shape except the bases of them have rips. Very collectible boat these can go for about 8k-16K in good shape. The motor itself will bring you 2K just for parts if you go that route. Motor has great compression, new spark plugs and wires as well and all ignition coils have been tested.

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 14222
Re: GCOTD
« Reply #617 on: July 28, 2025, 03:55:39 PM »
1968 Glastron 14? Skiflite
$2,000
Listed a day ago in Battle Lake, MN

https://www.facebook.com/marketplace/item/744846775109793/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp%3A376ffb21-b1ee-46e0-9092-7a6c4d4011d4

14? 1968 Glastron Skiflite boat for sale with motor and trailer. Boat has original seats, paint, and hardware. Motor is 1970 Bearcat 55 four cycle four cylinder. Trailer is 1965 roller trailer with permanent license.
$2,000 OBO
Located in Battle Lake, MN
Please call Richard for questions

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 14222
Re: GCOTD
« Reply #618 on: July 28, 2025, 04:01:00 PM »
1974 Glastron Carlson CV16
$2,500
Listed a day ago in Quincy, IL

https://www.facebook.com/marketplace/item/1183632880470870/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp%3A376ffb21-b1ee-46e0-9092-7a6c4d4011d4

Great running 70hp Nissan.  Power tilt and trim.  Prop is perfect.  Bluetooth stereo with 6x9 speakers.  Bimini in great shape with cover. Seats are also in great shape.  Carpet is good with stains.  Floor is solid.    This is not a new boat but a dependable one that is fun on the water.  Does good pulling a tube.  No leaks at all.  Trailer has new bearings and tires are good.  Family is just too big for this boat now.

Offline Hyperacme

  • Administrator
  • Hero Member
  • *****
  • Posts: 14222
Re: GCOTD
« Reply #619 on: July 28, 2025, 04:05:34 PM »
1971 Glastron Carlson CV16
$200
Listed 2 days ago in Superior, WI

https://www.facebook.com/marketplace/item/762746499455955/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp%3A376ffb21-b1ee-46e0-9092-7a6c4d4011d4

Vintage Glastron boat and trailer
This boat has had the floor and stringers removed. 
Comes with a trailer, trailer has bill of sale. 
Best offer.