Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Login
Register
Minnesota Classic Glastron Forum
»
General Category
»
General Discussion
»
1979 Mercury 115 Issues
« previous
next »
Print
Pages: [
1
]
Author
Topic: 1979 Mercury 115 Issues (Read 2254 times)
0 Members and 1 Guest are viewing this topic.
17ireid
Full Member
Posts: 87
1980 Glastron CVX 16 Deluxe
1979 Mercury 115 Issues
«
on:
July 21, 2015, 08:43:10 AM »
So, I bought an old 1979 115hp Mercury that I was told will definitely run first try (actually gave me a warranty to bring it back for a refund) But on my first try the starter spun at a pretty good rpm but the Bendix didnt engage I've fixed all the bad wiring and cleaned out all connections and pieces throughout the entire engine including all related to the starter. The Bendix seems to work smoothly when turned by hand. Solenoid switch is good and the battery is putting out 12.5 Volts and the drop at the Starter is 9.7 Volts which seems about right. The starter has hit the crank once but not powerful enough to turn the engine over. Would a rebuild of the starter fix this? Or should I buy a new one? Or am I missing something here.
Thanks!
Logged
74 Carlson the II
Sr. Member
Posts: 252
74 CV16
Re: 1979 Mercury 115 Issues
«
Reply #1 on:
July 22, 2015, 07:09:42 PM »
Lube with WD-40, dirty old grease or lube will make it stick a little. WD will clean and lube at the same time, when your done with that wipe up extra WD then lube with a light weight grease. Snowmobile suspension grease works well.
Logged
Steve
74 CV16 115 merc inline 87'
76 CV16 115 merc inline 76' 1150
72 CV19 outboard, no engine YET. Speed? (Unlimited)!!!!!!
Print
Pages: [
1
]
« previous
next »
Minnesota Classic Glastron Forum
»
General Category
»
General Discussion
»
1979 Mercury 115 Issues